TP-Link TL-WA5210G TL-WA5210G V1 QIG 7106503701 - Page 2
Connecting the device - configuration
UPC - 845973051488
View all TP-Link TL-WA5210G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
2 Connecting the device Note Please use only wired network connections to configure the AP. Locate a suitable mounting site for your CPE. For choosing the best location, select an elevated location where trees, buildings and large steel structures will not obstruct the antenna signals and which offers maximum line-of-sight propagation with the users. Adjust the direction of your CPE for a best signal. Place the straps through the slots on the back of the CPE and then around the pole. Tighten the straps. Note To get a best signal, you can refer to the Antenna Alignment on Page 8. Connect one end of an Ethernet cable to the POE port of the provided Power Injector and the other end of the Ethernet cable to the LAN port of the CPE. Then, connect the LAN port of the Power Injector to a PC using another Ethernet cable. Finally, plug the provided power adapter into the DC jack on the Power Injector, and the other end to a standard electrical wall socket. 2