TP-Link TL-WA5210G TL-WA5210G V1 QIG 7106503701 - Page 3
Solid light, Solid light or flashing - power adapter
 |
UPC - 845973051488
View all TP-Link TL-WA5210G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
The connection will be similar to the figure below after the above steps are finished. If you use two CPEs to build the network, please make sure that the two CPEs are placed face to face. Turn on all your network devices and then check to see if the LEDs on the AP display normally as the diagram below describes. Solid light Solid light or flashing Solid light Note If the LEDs display abnormally, please check to see if all the cable connectors (power adapter and Ethernet cable) are well connected to your device. 3
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10
-
11
-
12
-
13
-
14
-
15
-
16
 |
 |
3
The connection will be similar to the figure below after the above steps are
finished.
Turn on all your network devices and then check to see if the LEDs on the AP
display normally as the diagram below describes.
Note
If the LEDs display abnormally, please check to see if all the cable connectors
(power adapter and Ethernet cable) are well connected to your device.
If you use two
CPEs to build
the network,
please make
sure that the
two CPEs are
placed face to
face.
Solid light
Solid light
Solid light or flashing