TP-Link TL-WPA4230P TL-WPA4230P V1 User Guide EU - Page 14
Hardware Connection - instructions
View all TP-Link TL-WPA4230P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
TL-WPA4230P AV500 Passthrough Powerline WiFi Extender 2.4 Hardware Connection Please first make sure that your PC can successfully access the Internet via the router. Then connect the powerline devices by following the instructions below. Step 1: Connecting to the Internet This section describes how to connect the powerline extender into your existing network. Follow the procedures described below: 1.Connect one end of an Ethernet (RJ45) cable to the Ethernet port of the powerline extender or a compatible powerline adapter like TL-PA4020P. 2.Connect the other end of the Ethernet (RJ45) cable to an available Ethernet port of your wireless router. 3.Plug the powerline extender or powerline adapter into a wall socket. 4.Check and confirm the LEDs status. (The Power LED and Ethernet LED on the powerline device should be ON.) The hardware connection mechanism is shown below: Note: Do not connect the powerline extender or powerline adapter to an extension lead, power strip, extension cord, or surge protector, as these may degrade the network performance. Step 2: Connecting the Computer Following are the steps to properly connect the powerline extender to your computer: 1.Connect one end of the provided Ethernet (RJ45) cable to the powerline extender's Ethernet port. 2.Connect the other end of the Ethernet (RJ45) cable to you computer's LAN port. 3.Plug the powerline extender into a wall socket next to the computer. 4.Turn on your computer. 5.Check and confirm that the Power LED and Ethernet LED on the powerline extender are ON. 5