TP-Link TL-WPA4230P TL-WPA4230P V1 User Guide EU - Page 31

TL-WPA4230P AV500 Passthrough Powerline WiFi Extender 3.5 Powerline There are two submenus under the Powerline menu: Network Settings and Station Settings. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. Figure 3-18 Powerline menu 3.5.1 Network Settings Selecting Powerline > Network Settings, and you can configure the network name of the powerline extender or all the stations in current network on this page. Figure 3-19 Network Settings  MAC Address - The physical address of the powerline extender, as seen from the powerline. The value can not be changed.  Device Password - The password of the powerline extender. The value can not be changed.  Network Name - Enter the network name (factory default - HomePlugAV). Click the Default button to enter the default network name. Click the Set Local button to set the powerline extender. Click the Set All button to set all stations which entered the correct passwords in current network, including the powerline extender.  Note: If you set all stations network name, the remote ones which power off or entered the wrong password will not take effect. 3.5.2 Station Settings The Station Settings page shows remote stations in current network and allows you to enter, modify or delete the password and name for each station. 22