TRENDnet TEW-823DRU User's Guide - Page 39
Open a device on your network to the Internet, DMZ, Virtual Server, insecure, Advanced, Firewall
![]() |
View all TRENDnet TEW-823DRU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
TRENDnet User's Guide Open a device on your network to the Internet This router can provide access to devices on your local area network to the Internet using the Virtual Server, Special Application, method (DMZ NOT recommended). DMZ Advanced > Firewall > DMZ You may want to expose a specific computer or device on your network to the Internet to allow anyone to access it. Your router includes the DMZ (Demilitarized Zone) feature that makes all the ports and services available on the WAN/Internet side of the router and forwards them to a single IP address (computer or network device) on your network. The DMZ feature is an easy way of allowing access from the Internet however, it is a very insecure technology and will open local area network to greater threats from Internet attacks. It is strongly recommended to use Virtual Server (also called port forwarding, see "Virtual Server" on page 36) to allow access to your computers or network devices from the Internet. 1. Make the computer or network device (for which you are establishing a DMZ link) has a static IP address. Signing up for a Dynamic DNS service (outlined in Identify Your Network section page 31) will provide identification of the router's network from the Internet. 2. Log into your router management page (see "Access your router management page" on page 9). 3. Click on Advanced and click Firewall, then click on DMZ. 4. Click the DMZ Enable drop-down list, and select Enable. 5. Enter the IP address you assigned to the computer or network device to expose to the Internet. 6. To save changes, click Apply. © Copyright 2014 TRENDnet. All Rights Reserved. TEW-823DRU Virtual Server Advanced > Firewall > Virtual Server Virtual Server (also called port forwarding) allows you to define specific ports (used or required by a specific application) and forward them to a single IP address (a computer or device) on your network. Using this feature is more secure compared to using DMZ (see "DMZ" on page 36) in which DMZ forwards all ports instead of only specific ports used by an application. An example would be forwarding a port to an IP camera (TRENDnet IP cameras default to HTTP TCP port 80 for remote access web requests) on your network to be able to view it over the Internet. To open several ports please refer to "Gaming" section on page 39. Since most ISPs constantly change your home IP address, to be able to access the Virtual Server port(s) from the Internet it is recommended to setup Dynamic DNS service (outlined in Identify Your Network section page 31). 1. Log into your router management page (see "Access your router management page" on page 9). 2. Click on Advanced and click on Firewall, then click on Virtual Server. 3. Review the virtual server settings. Click Add to save settings. Check the option to the left most of the entry to enable and uncheck to disable. • Rule Enable - Check the option to enable the virtual server. • Rule Name - Enter a name for the virtual server. • IP Address: Enter the IP address of the device to forward the port (e.g. 192.168.10.101). • Protocol: Select the protocol required for your device. TCP, UDP, or Both (TCP and UDP). • Public Port - Enter the port number used to access the device from the Internet. • Private Port - Enter the port number required by your device. Refer to the connecting device's documentation for reference to the network port(s) required. Note: The Public Port can be assigned a different port number than the Private Port (also known as port redirection), however it is recommended to use the same port number for both settings. Please refer to the device documentation to 36
![](/manual_guide/products/trendnet-tew823dru-users-guide-9c85cea/39.png)