Thermador HMIB42WS Installation instructions - Page 17
Electrical Connection
View all Thermador HMIB42WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Electrical Connection WARNING Electrical Shock Hazard Disconnect power before servicing. Replace all parts and panels before operating. Failure to do so can result in death or electrical shock. • Disconnect power. • Remove terminal box cover. • Remove the knockout in the terminal box cover and install a UL listed or CSA approved 1⁄2" strain relief. • Run home power supply cable through strain relief, into terminal box. B A D F • Use UL listed wire connectors and connect black wires (C) together. • Use UL listed wire connectors and connect white wires (E) together. WARNING Electrical Shock Hazard Electrically ground blower. Connect ground wire to green and yellow ground wire in terminal box. Failure to do so can result in death or electrical shock. • Connect green (or bare) ground wire from home power supply to yellow-green ground wire (F) in terminal box using UL listed wire connectors. • Tighten strain relief screw. • Install terminal box cover. • Reconnect power. C E A. Home power supply cable B. UL listed or CSA approved strain relief C. Black wires D. UL listed wire connectors E. White wires F. Green (or bare) and yellow-green ground wires Installation Instructions English | 17 |