Toshiba 100CT User Manual - Page 134
Moving Within the SETUP Menu and Changing Values, Accepting Changes and Exiting the SETUP Window
View all Toshiba 100CT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
File No. 960-140 Moving Within the SETUP Menu and Changing Values 1. Press and to move between the two columns. Press PgDn and PgUp to move between the two pages. Press ↑ and ↓ to move between items in a column. 2. Press either the space bar or BkSp to change the value. Accepting Changes and Exiting the SETUP Window 1. Press End to accept the changes you made. If the changed item does not require the system to reboot, the following message displays: Are you sure? (Y/N) If the changed item requires the system to reboot, the following message displays: Are you sure? (Y/N) The changes you made will cause the system to reboot. 2. To make other changes, press N. Repeat the steps above. 3. To accept the changes, press Y. NOTE: You can press Esc to quit at any time without saving changes. SETUP asks you to confirm that you do not want to save your changes. The Factory Preset Configuration When you access SETUP, the current configuration displays. 1. To show the factory preset configuration, press Home. 2. To accept the default settings, press End and then press Y. NOTE: When you execute the default setting, the following settings are not changed: HDD Mode Password Sound System: I/O Address, Interrupt Level, DMA Write Policy 3-59