Toshiba 55SL417U User Manual - Page 19

Using the TV remote and HDMI® CEC Control to control other devices, Connecting an HDMI audio system - sound

Page 19 highlights

Chapter 2: Connecting your TV Using the TV remote and HDMI® CEC Control to control other devices To control the basic functions of connected audio/video devices using the TV's remote control, connect an HDMI® CEC compatible audio receiver or playback device. The HDMI® CEC Control feature uses CEC technology as regulated by the HDMI standard. Audio receiver Playback device (HDMI® CEC DVD player,etc.) TV back panel HDMI cable HDMI OUT HDMI IN HDMI OUT HDMI cable Playback device (HDMI® CEC DVD player,etc.) HDMI OUT To connect an audio receiver and playback devices, you will need: •HDMI cables (- p. 14) Note: • If several devices are connected, the HDMI® CEC Control feature may not operate properly. • For proper operation, it is recommended that you use HDMI cables with the HDMI Logo ( ). Before controlling the devices: •For an explanation of setup and operations, see "Using HDMI® CEC Control" (- p. 39). •Configure the connected devices. See each device's operation manual. Note: This feature is limited to models incorporating Toshiba's HDMI® CEC Control feature. However, Toshiba is not liable for those operations. See the individual instruction manuals for compatibility information. When using an external AV amplifier: The picture and sound may not be properly synchronized. In this case, adjust the delay time of the sound on the AV amplifier. Note: The control range of the delay time differs according to the device you use. Connecting an HDMI audio system If your HDMI amplifier supports ARC, audio from the TV can be sent to the amplifier via the existing HDMI cable. You will need: •HDMI cable TV back panel AV amplifier that supports ARC HDMI cable Note: Only HDMI 1 supports ARC. HDMI's ARC (Audio Return Channel) feature This feature enables the audio signal of the TV to be sent to an AV amplifier via the HDMI cable. It will not be necessary to connect a cable from the audio output of the TV to the audio input of the AV amplifier to reproduce the audio received from the tuner of the TV through the AV amplifier. 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93

19
Chapter 2: Connecting your TV
Using the TV remote and HDMI
®
CEC Control to control other devices
To control the basic functions of connected audio/video devices using the TV’s remote control, connect an HDMI
®
CEC compatible audio receiver or playback device. The HDMI
®
CEC Control feature uses CEC technology as
regulated by the HDMI standard.
To connect an audio receiver and playback devices, you will need:
•HDMI cables (
-
p. 14)
Note:
If several devices are connected, the HDMI
®
CEC Control feature may not operate properly.
For proper operation, it is recommended that you use HDMI cables with the HDMI Logo (
).
Before controlling the devices:
•For an explanation of setup and operations, see “Using HDMI
®
CEC Control” (
-
p. 39).
•Configure the connected devices. See each device’s operation manual.
Note:
This feature is limited to models incorporating Toshiba’s HDMI
®
CEC Control feature. However, Toshiba is not liable
for those operations. See the individual instruction manuals for compatibility information.
When using an external AV amplifier:
The picture and sound may not be properly synchronized. In this case, adjust the delay time of the sound on the AV
amplifier.
Note:
The control range of the delay time differs according to the device you use.
Connecting an HDMI audio system
If your HDMI amplifier supports ARC, audio from the TV can be sent to the amplifier via the existing HDMI cable.
You will need:
•HDMI cable
HDMI
OUT
HDMI
IN
HDMI
OUT
HDMI
OUT
TV back panel
Audio
r
eceive
r
Playback device
(HDMI
®
CEC DVD playe
r
,etc.)
Playback device
(HDMI
®
CEC DVD playe
r
,etc.)
HDMI cable
HDMI cable
TV back panel
HDMI
cable
AV amplifie
r
that
suppo
r
ts ARC
HDMI's ARC (Audio Return Channel) feature
This feature enables the audio signal of the TV to
be sent to an AV amplifier via the HDMI cable.
It will not be necessary to connect a cable from
the audio output of the TV to the audio input of
the AV amplifier to reproduce the audio
received from the tuner of the TV through the
AV amplifier.
Note:
Only HDMI 1 supports ARC.