Toshiba 55SL417U User Manual - Page 70

Chapter 9: Troubleshooting General troubleshooting Before calling a service technician, please check this chapter for a possible cause of the problem and some solutions you can try. Black box onscreen • The closed caption feature is set to one of the Text modes (T1, T2, T3, or T4). Set the closed caption feature to Off (- p. 35). TV stops responding to controls • If the TV stops responding to the remote control or TV control panel and you cannot turn off the TV, press and hold the POWER button on the TV control panel for 5 seconds or more to reset the TV. Other problems • If your TV's problem is not addressed in this Troubleshooting section or the recommended solution has not worked, perform the Reset Factory Defaults procedure (- p. 44). TV will not turn on • Ensure the power cord is plugged in. Press p. • Replace the remote control's batteries. • Try the control panel buttons. Picture problems General picture problems • Check the antenna/cable connections (- 15-21). • Press INPUT on the remote control or the TV and select a valid video input source (- p. 34). If no device is connected to an input on the TV, no picture appears when you select that particular input source. Check device connections (- 16-21). • Antenna reception may be poor. Use a highly directional outdoor antenna (if applicable). • The station may be having broadcast difficulties. Try another channel. • Adjust the picture quality (- p. 48). • If the Edge Booster does not achieve a sharper picture, change the Sharpness value to increase the sharpness level (- P. 48). Video Input Selection problems • If the Input Selection window does not appear when you press INPUT on the remote control or the TV control panel, press INPUT a second time. The TV displays the next video input source and the Input Selection screen. Cannot view external signals or channel 3 or 4 • If you cannot view signals from external devices connected to VIDEO 1, VIDEO 2, ColorStream HD1, ColorStream HD2, HDMI 1, HDMI 2, HDMI 3, HDMI 4, PC, or from channel 3 or 4, ensure the Input Lock is set to Off (- p. 38). Poor color or no color • The station may be having broadcast difficulties. Try another channel. • Check the Input mode when you use Shared Inputs (p. 30). • Adjust the Tint and/or Color (- p. 48). Poor composite picture • If the TV is connected to an external A/V device (e.g. DVD player, video game system, set-top box, etc.) try using a ColorStream or HDMI video connection instead. Picture and sound are out of sync • As with all products that contain a digital display, this may occur in rare instances when viewing certain content (e.g. television broadcasts, video games, DVDs). Possible causes may include, without limitation, video processing within the TV, video processing in an attached gaming system, and video processing or different compression rates used by broadcasters in their programming. Try the following procedures: - If the TV is connected to an A/V receiver that has a programmable audio delay feature, use this feature to help synchronize the sound to the picture. - If the problem occurs only on certain TV channels, inform your local broadcast, cable, or satellite provider. • The settings of Side Shared Audio and Rear Shared Audio may be not correct. Ensure the settings (- p. 30). Sound problems • Check the antenna/cable connections (- 15-20). • The station may be having broadcast difficulties. Try another channel. • The sound may be muted. Press VOLUME. • If you hear no sound, try setting the MTS feature to Stereo mode (- p. 52). • If you are not receiving a second audio program from a known SAP source, make sure the MTS feature is set to SAP mode (- p. 52). • If you hear audio that seems incorrect for the program you are watching (such as music or a foreign language), the SAP mode may be on. Set the MTS feature to Stereo mode (- p. 52). • If you connect a PC using either the PC IN terminal or an HDMI terminal, ensure that the Rear Shared Audio setting is properly set (- p. 42). Remote control problems • Ensure the remote control is set to the correct device mode (- p. 79). • Remove all obstructions between the remote control and the TV. • Replace the remote control's batteries (- p. 22). • Your TV's remote control may not operate certain features on your external device. Refer to the owner's manual for your other device to determine its available features. If your TV remote control does not operate a specific feature on another device, use the remote control that came with the device (- p. 82-87). • If the TV still does not act as expected, perform the Reset Factory Defaults procedure (- p. 44). 70