Toshiba TDP-XP1 User Manual - Page 23

Connection Before connection • Read the owner's manual of the device you are connecting to the projector. • Some computers cannot be used with or connected to this projector. Check for an RGB output terminal, supported signal p.43 , etc. • Turn off the power of both devices before connecting. • The figure below shows sample connections. This does not mean that all of these devices can or must be connected simultaneously. Video recorder, DVD player, etc. Monitor Computer (for control) To video output To audio output Audio cable (not supplied) Video cable (not supplied) p.45 To RS-232C terminal Control cable Preparations Computer RGB cable (supplied) To RGB output S-Video cable (not supplied) To S-video output Audio cable (not supplied) To audio input Notes Video recorder, DVD player, etc. Audio amplifier, etc. • Moving pictures played back on computers using DVD software may appear unnatural when projected with this projector. However, it is not a malfunction of the projector. • When an AUDIO OUT terminal is connected, sound is not output from the projector speaker. • Output volume of AUDIO OUT terminal can be adjusted by the VOL+/- button. • The MONITOR OUT terminal outputs analog RGB signals or component video signals (Y/PB/PR) from the COMPUTER IN terminals. • A computer monitor usually cannot accept Y/PB/PR signals correctly. 23