Toshiba TDP-XP1 User Manual - Page 26

Basic operations 1 Turn on the power. Turn on the power by following the instructions in "Turning the power on" p.24 . 2 Select the language (When using the first time). When the projector is used for the first time after purchase, the start menu for language (to display the menus and messages on screen) and configuration is displayed in English. (if the screen is out of focus, adjust it according to the step 6 .) Use the , , or button to select the desired language and press the button. Message for setup confirmation is displayed in a selected language. English French German Italian Spanish Portuguese Russian Swedish Turkish Romanian Simplified Chinese Traditional Chinese Polish Indonesian Norwegian Finnish Czech Hungarian Greek Danish Dutch Notes • When the projector is turned on the next time, the start menu does not appear upon startup. • The language can also be set via the Default setting menu p.34 . • This owner's manual assumes that English has been selected. 3 Activate the connected device. Turn on and start the connected device such as a computer. 4 Press the INPUT button. An image of the connected equipment is projected. Each time you press the INPUT button, it switches to another source signal from the equipment which is connected to the projector. Notes • When [Auto input search] is set to [On] in the Default setting menu p.34 (factory setting is [On]), the input is switched to the connected equipment that is outputting video signals each time you press the INPUT button p.43 . • Right after the input source is switched to the other, the color of the image may change slightly. 26