Turtle Beach Riviera User's Guide - Page 9

Installing The Riviera Sound Card - pci sound card

Page 9 highlights

WWW.TURTLEBEACH.COM INSTALLING THE RIVIERA SOUND CARD If you're replacing a sound card that's already in your PC, or if your PC has a sound chip on the motherboard (i.e. if there are headphone and microphone jacks on the front or rear of your PC): Uninstall the drivers and associated software for the old sound card or sound chip on your motherboard before installing your Riviera sound card. This will help avoid any possible conflicts between the Riviera sound card drivers and the older drivers. Generally, drivers can be removed in the Add/Remove Programs option, located in the Windows Control Panel. However, you should consult the PC or motherboard manufacturer's documentation for complete instructions, as the uninstall procedure may differ with each manufacturer. Check the Turtle Beach Knowledge base, at www.turtlebeach.com for more information.  IMPORTANT! Read the warranty information included with your PC before you open its case to remove the old sound card and/or install the Riviera. Turtle Beach cannot be held responsible for loss of warranty coverage or other damages incurred as a result of modifications to the computer system by unauthorized personnel. INSTALLING THE RIVIERA 1. Turn off your PC, unplug its power cord and disconnect any external peripherals. Remove your PC‟s cover. 2. If you're replacing a sound card that's already in your PC... unscrew its bracket and gently rock the card out of its PCI slot to remove it from your PC. 3. Consult your motherboard documentation to locate the unshared PCI expansion slots. Select one that is empty for installing the card. We recommend using a free PCI expansion slot that‟s furthest away from the video card and power supply. Remove the metal slot rear cover by unscrewing its securing screw. Save the screw to secure the sound card to the chassis later.  Motherboards with five or more PCI slots will have two or more slots that share the same IRQ (interrupt request line). Be sure to install the Riviera in a PCI slot that has its own, unshared IRQ. If you find that your computer locks up after you have installed the Riviera, reinstall the Riviera card to a different, unshared PCI slot. 4. Before removing the Riviera sound card from its protective bag, touch the PC chassis to discharge any static electricity build-up from your body. Hold the card by its edges to avoid touching the gold edge connectors or components 5. With a gentle back-and-forth rocking motion, press the gold-striped edge connector on the Riviera sound card firmly into the PCI slot until it snaps in place. Secure its rear metal bracket to the chassis with the screw you removed in the previous step. 5 Riviera

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

WWW
.
TURTLEBEACH
.
COM
5
Riviera
I
NSTALLING THE
R
IVIERA
S
OUND
C
ARD
If you’re replacing a sound card that’s already in your PC, or if your PC has a sound chip on the
motherboard (i.e. if there are headphone and microphone jacks on the front or rear of your PC):
Uninstall the drivers and associated software for the old sound card or sound chip on your motherboard
before installing your Riviera sound card. This will help avoid any possible conflicts between the Riviera
sound card drivers and the older drivers.
Generally, drivers can be removed in the
Add/Remove Programs option
, located in the Windows Control
Panel. However, you should consult the PC or motherboard manufacturer's documentation for complete
instructions, as the uninstall procedure may differ with each manufacturer.
Check the Turtle Beach
Knowledge base, at
www.turtlebeach.com
for more information.
IMPORTANT!
Read the warranty information included with your PC before you open its case to
remove the old sound card and/or install the Riviera. Turtle Beach cannot be held responsible for loss
of warranty coverage or other damages incurred as a result of modifications to the computer system
by unauthorized personnel.
I
NSTALLING THE
R
IVIERA
1.
Turn off your PC, unplug its power cord and disconnect any external peripherals. Remove your
PC‟s cover.
2.
If you’re replacing a sound card that’s already in your PC…
unscrew its bracket and gently
rock the card out of its PCI slot to remove it from your PC.
3.
Consult your motherboard documentation to locate the unshared PCI expansion slots. Select one
that is empty for installing the card. We recommend using a free PCI expansion slot that‟s furthest
away from the video card and power supply. Remove the metal slot rear cover by unscrewing its
securing screw.
Save the screw to secure the sound card to the chassis later.
Motherboards with five or more PCI slots will have two or more slots that share the same IRQ
(interrupt request line). Be sure to install the Riviera in a PCI slot that has its own, unshared IRQ. If
you find that your computer locks up after you have installed the Riviera, reinstall the Riviera card to a
different, unshared PCI slot.
4.
Before removing the Riviera sound card from its protective bag, touch the PC chassis to discharge
any static electricity build-up from your body.
Hold the card by its edges to avoid touching the
gold edge connectors or components
5.
With a gentle back-and-forth rocking motion, press the gold-striped edge connector on the Riviera
sound card firmly into the PCI slot until it snaps in place. Secure its rear metal bracket to the
chassis with the screw you removed in the previous step.