URC DMS-AV Owners Manual - Page 13
Remote Infrared Input, HDMI Inputs/Output, Main AC Rocker Style Switch, Composite Video - total control
![]() |
View all URC DMS-AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
DMS-AV HOME THEATER AMPLIFIER 3. Remote Infrared Input - The Infrared Input port allows for easy integration with an RF(radio frequency) to IR (infrared) style base station, such as the URC MRF-350 or MRF-260. This port provides the ability to perform simple one-way control of the DMS-AV with a URC legacy-style infrared remote control, such as a MX-900, MX-980 or MX-880, among others. Use of this port with RF based remote controls allows for "stand alone" operation of the DMS-AV, that is, use of the DMS-AV without an MRX-10/MRX-12 or similar external URC Advanced System Controller. This is a 3.5 mm mono style female mini jack input, with the tip being positive(+), and the sleeve being ground. 4. HDMI Inputs/Output - The DMS-AV supports six HDMI connections; five are used for signal input, while one supports HDMI signal output. The DMS-AV supports a single HDMI video output. All video signals sent to the DMS-AV via composite, component, HDMI, or generated by the internal on-screen display output via the HDMI OUT connector. The HDMI Technology within the DMS-AV supports all versions of HDMI, which means it is compatible with the following formats: sRGB YCbCr Blu-ray Disc and HD DVD Video and Audio at Full Resolution Consumer Electronic Control (CEC) Deep Color xvYCC Auto Lip-Sync Dolby TrueHD Bitstream Capable DTS-HD Master Audio Bitstream Capable Audio Return Channel 3D over HDMI 5. Main AC Rocker Style Switch - Provided is a Main AC Rocker Switch. This switch is sometimes known as a "Vacation" switch, and is used to remove main AC from the DMS-AV, or perform a hard reboot of the unit. 6. Composite Video Inputs - The DMS-AV supports four composite video RCA connectors. All video present at these connectors is upconverted to the HDMI Video Output. 7. Analog Audio Inputs - The DMS-AV provides seven total analog audio inputs. Six of these inputs support a line-level analog audio signal. One of these inputs will support a phono level analog audio signal. The Phono Input supports the MM (Moving Magnet) phono input type. The Phono Input also provides a ground lug connector on the DMS-AV back panel. Page 14
![](/manual_guide/products/urc-dmsav-owners-manual-2d0a3ae/13.png)