URC DMS-AV Owners Manual - Page 21
Audio Inputs - Hardware Connections
![]() |
View all URC DMS-AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
DMS-AV HOME THEATER AMPLIFIER Audio Inputs - Hardware Connections Audio Input Connection - HDMI Although an HDMI connection carries both audio and video, the DMS-AV can process audio and video separately (please see the menu structure for further information). To connect an HDMI audio source to the DMS-AV, connect the HDMI cable to the HDMI output on the source. Then connect the other end of the cable into the corresponding HDMI input on the DMS-AV. Audio Input Connection - Optical Digital The DMS-AV provides two optical digital audio inputs. These inputs may be used to receive an optical digital audio signal from a source connected to the DMS-AV. Connect the optical digital audio output on the source using an optical cable to the desired optical digital audio input on the DMS-AV. Shown is an optical digital audio source connected to the optical digital audio IN A. Connection to optical digital audio source Audio Input Connection - Coax Digital The DMS-AV provides two coaxial digital audio inputs. These inputs may be used to receive an coaxial digital audio signal from a source connected to the DMS-AV. Connect the coaxial digital audio output on the source using a coax cable to the desired coaxial digital audio input on the DMS-AV. Shown below is a coaxial digital audio source connected to the coaxial digital audio IN C. Connection to coaxial digital audio source Audio Input Connection - Stereo Analog The DMS-AV provides seven pairs of stereo analog audio inputs. Six pairs of analog inputs accept a line level audio signal. One pair of analog inputs accepts a phono (MM) level audio input. A ground lug for the phono input is also provided. Any of these seven inputs may be set to become a network multicast "streaming" source, that can be shared with any URC DMS Amplifier. The DMS-AV can create a maximum of two multicast streams. These inputs may be used to receive a stereo analog audio signal from a source to the DMS- AV. Connect the stereo analog audio output on the source using a RCA cable to the analog stereo audio input on the URC. Shown is a stereo analog audio source going into the stereo analog audio input IN 1. Connection to analog signal source Page 22
![](/manual_guide/products/urc-dmsav-owners-manual-2d0a3ae/21.png)