URC DMS-AV Owners Manual - Page 32
Front Height Speakers, Subwoofers
![]() |
View all URC DMS-AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
DMS-AV HOME THEATER AMPLIFIER Front Height Speakers It is not necessary to have front height speakers. Set the Front Height Option in the on-screen display to Yes or No, or set this in the URC Accelerator, based on the surround channels availability. If set to none, the front height speaker information will be reproduced in the front speakers and although no information is lost, the sense of sounds coming from directly above you may be lost. If front height speakers are used, surround back speakers are not available. Subwoofer(s) There are four choices for subwoofer. If set to No, all bass information, including LFE (.1 channel) will be routed to any speakers that are configured to pass low frequency information, as described in the setup above. If the individual speaker crossovers are not set to pass low frequency information, and no subwoofers are used in the system, the low frequency information shall be lost. The most common setting for subwoofer is Preout 1/2, which allows for connections of two subwoofers, taking advantage of the DMS-AV's ability to reproduce low frequency information through two subwoofers (.2). Setting the Subwoofer to Preout 1 shall configure the DMS-AV to send low frequency information from its Sub 1 preamplifier output only. Setting the Subwoofer to Preout 2 shall configure the DMS-AV to send low frequency information from its Sub 2 preamplifier output only. Speaker Distance Ideally the speakers should be positioned at an equal distance from the listening position. However, physical limitations usually require placing the speakers in other than optimum locations. The DMS-AV contains a means to electronically move each speaker's location. This allows for superior reproduction of the directional cues available during movie or music playback. Measure the distance in feet from your listening position to each speaker. Enter this information into DMS-AV's on-screen display, or into the URC Accelerator Application. Default measurement units are feet, but units may be changed to meters if preferred. Page 33
![](/manual_guide/products/urc-dmsav-owners-manual-2d0a3ae/32.png)