Uniden APPCAM26PT User Manual - Page 8
Network Setup And, Camera Installation
View all Uniden APPCAM26PT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
NETWORK SETUP AND CAMERA INSTALLATION OVERVIEW There are two methods of connecting the AppCam Pan/Tilt cameras to your mobile device. One method is wireless and the other method has the camera connected directly to the router using the provided Ethernet cable. The add camera procedures themselves are identical. In the setup procedures that follow, the wired connection instructions are noted where applicable. Use these same procedures to add additional cameras to your network. PREREQUISITES •• Your router must support WEP/WPA/WPA2 security and it must be turned on. •• You must have an available WiFi-enabled mobile device (iOS smartphone/ tablet). •• The AppCam Pan/Tilt and your mobile device must connect to the same WiFi router for setup. STEP 1 - SET UP CAMERA AND SMARTPHONE/TABLET 1. Download the Uniden® AppCam™ app from the Apple App Store onto your device. 2. Connect the antenna to the camera. 8