Uniden BC780XLT English Owners Manual - Page 68
Clone Mode
View all Uniden BC780XLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Uniden Parts Department (800) 554-3988 (Hours are from 7:00 a.m. to 5:00 p.m. Central Time Monday through Friday) scanner.uniden.com Scanner Master (800) 722-6701 (Hours are from 10:00 a.m. to 5:00 p.m. Eastern Time Monday through Friday) PC Control Parameter For your information: Transfer speed : 2400/4800/9600/19200 bps (adjustable) Start/Stop : 1 bit, 1 bit Data Length : 8 bit Parity bit : None Code : ASCII code Flow Control : None Return Code : Carriage Return only Change Transfer Speed To change transfer speed, enter into the menu mode. 1. Press MENU. 2. Press or to select SYSTEM DATA and then press E. 3. Press or to select PC CONTROL and then press E. 4. To change the transfer speed, press or . Then press E. Clone Mode You will need to purchase an RS232C cable and a null modem adapter. RS232C cables are available as male to male or male to female. Even if the cable you buy already has the Male to Male connectors, you will still have to have the null modem adapter. Below you will see the pin connections that are internal to a standard device. (These items are available at your local electronics stores.) To connect the scanner to scanner: Plug the male end of the RS232C straight interface cables into the remote port on the rear of one of the two scanners. Then connect the DB-9 to DB-9 null modem adapter to the cable. Then plug the other side of the null modem adapter to the other scanner. (DB9 Gender changers are also available at your local electronics store.) Null Modem Adapter Pin connections Female DB9 1 2 3 4 5 6 7 8 9 Male DB9 4 3 2 6 & 1 5 4 8 7 Not used 60