Uniden BC785D English Owners Manual - Page 24

Alpha Tag, Trunk, Delay, Scan Option, Conventional, Delay, Attenuator, Attenuator, Tone Data, Record

Get Uniden BC785D PDF manuals and user guides View all Uniden BC785D manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

4:ALPHA TAG You can enter an Alpha Tag for any or all of the search ranges. 5:TRUNK During Chain Search mode, when the scanner finds an active frequency, the trunk tracking system will be active. Four frequency plans apply to the Control Channel Only feature (for details see page 66). 3:DELAY Set the delay for the search ranges. This applies to Search mode, and Service Search mode. The delay time for Service Search mode can be changed. (See 2:SCAN OPTION / 1:CONVENTIONAL / 2:DELAY for details). 4:ATTENUATOR Set attenuation for all search ranges. (See 2:SCAN OPTION / 1:CONVENTIONAL/ 5:ATTENUATOR for details). 5:TONE DATA The default mode is OFF. This means that you will receive all transmissions on any frequencies that are active within your search range(s). By selecting CTCSS or DCS you can set the radio to receive only a particular subaudible tone to be received during your search. You can also lockout a particular CTCSS or DCS tone. You may wish to do this if you want to search a range but not hear transmissions on any frequency that has a particular subaudible tone. Note: Through the System Menu you can set the radio to operate in Tone Search mode during Search as well. In this mode, the radio will automatically determine the active subaudible tone on any frequency received during the search. Set a delay for the search ranges. This applies to all ranges (See CHANNEL DATA-STEPS for details). 6:RECORD With Record set to on, any frequency that is active, during the search, can be recorded to an external tape recorder. 7:AUTO STORE You can automatically store active frequencies found during a search into the memory. You can select which bank you want to program the found frequencies. The audio will be muted during Auto Store. 2:SCAN OPTION 1:CONVENTIONAL Choose the channel number. The following options are available for the selected channel only. Repeat using a different channel number, if necessary. 1:FREQUENCY. Allows you to edit or enter a frequency in each channel you select. Also you can set an alphanumeric text tag for each programmed frequency. 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
4:ALPHA TAG
You can enter an Alpha Tag for any or all of the search ranges.
5:TRUNK
During Chain Search mode, when the scanner finds an active
frequency, the trunk tracking system will be active. Four frequency
plans apply to the Control Channel Only feature (for details see
page 66).
3:DELAY
Set the delay for the search ranges. This applies to Search mode, and
Service Search mode. The delay time for Service Search mode can be
changed. (See
2:SCAN OPTION
/
1:CONVENTIONAL
/
2:DELAY
for details).
4:ATTENUATOR
Set attenuation for all search ranges.
(See
2:SCAN OPTION
/
1:CONVENTIONAL
/
5:ATTENUATOR
for
details).
5:TONE DATA
The default mode is
OFF
. This means that you will receive all transmissions
on any frequencies that are active within your search range(s). By selecting
CTCSS or DCS you can set the radio to receive only a particular subaudible
tone to be received during your search. You can also lockout a particular
CTCSS or DCS tone. You may wish to do this if you want to search a range
but not hear transmissions on any frequency that has a particular
subaudible tone.
Note
: Through the System Menu you can set the radio to operate in Tone
Search mode during Search as well. In this mode, the radio will
automatically determine the active subaudible tone on any frequency
received during the search.
Set a delay for the search ranges. This applies to all ranges (See
CHANNEL DATA-STEPS for details).
6:RECORD
With Record set to on, any frequency that is active, during the search, can
be recorded to an external tape recorder.
7:AUTO STORE
You can automatically store active frequencies found during a search into
the memory. You can select which bank you want to program the found
frequencies. The audio will be muted during Auto Store.
2:SCAN OPTION
1:CONVENTIONAL
Choose the channel number. The following options are available for the selected
channel only. Repeat using a different channel number, if necessary.
1:FREQUENCY.
Allows you to edit or enter a frequency in each channel you select.
Also you can set an alphanumeric text tag for each programmed frequency.
20