Uniden BC785D English Owners Manual - Page 44

System Option, Sq Mode, Tone Sq, Tone Search, Scan Option, Conventional, Tone Data, Ctcss, Service

Get Uniden BC785D PDF manuals and user guides View all Uniden BC785D manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

• Tone Lock (out) mode For either a Memory channel or a Search Range, you can lock a particular subaudible tone by pressing L/O after scrolling to the desired tone. The scanner will stop on any transmission except those which may be using the locked subaudible tone. To set your scanner, enter into the Menu mode. 1. Press MENU. 2. Select 3:SYSTEM OPTION / 8:SQ MODE by rotating the VFO and pressing E. 3. Rotate the VFO to select one type (1:CSQ, 2:TONE SQ, 3:TONE SEARCH) and press E. 4. To set Tone Lock mode, do the following first, then select 2:TONE SQ in step 3. 1) For Scan mode, select 2:SCAN OPTION / 1:CONVENTIONAL - select the channel number - / 3:TONE DATA / 1:CTCSS or 2:DCS by rotating the VFO and pressing E. With CTCSS or DCS, Tone Lock ON is set by pressing L/O. 2) For Search mode, select 1:SERVICE OPTION / :CHAIN SEARCH / 5:TONE DATA / 1:CTCSS or 2:DCS by rotating the VFO and pressing E. With CTCSS or DCS Tone Lock ON is set by pressing L/O. Remember! You can also use or instead of rotating the VFO. Also instead of pressing E, you can press the VFO control. Note: • To set Tone Lock OFF for either Scan mode or Search mode, press E instead of pressing L/O on step 1) or 2) above. • CTCSS: Continuous Tone Coded Squelch System. • DCS: Digital Coded Squelch. • For example, the scanner shows the following displays. When Search mode and Tone Search are selected, the display shows the frequency and tone data alternately. • If the delay feature (-2 sec/-5 sec/-10 sec) has been set while in Tone search mode, it resumes scanning according to the delay setting. 40

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
•
Tone Lock (out) mode
For either a Memory channel or a Search Range, you can lock a particular subaudible
tone by pressing
L/O
after scrolling to the desired tone. The scanner will stop on any
transmission except those which may be using the locked subaudible tone.
To set your scanner, enter into the Menu mode.
1.
Press
MENU
.
2.
Select
3:SYSTEM OPTION
/
8:SQ MODE
by rotating the
VFO
and pressing
E
.
3.
Rotate the
VFO
to select one type (
1:CSQ
,
2:TONE SQ
,
3:TONE SEARCH
)
and press
E
.
4.
To set Tone Lock mode, do the following first, then select
2:TONE SQ
in step 3.
1) For Scan mode, select
2:SCAN OPTION
/
1:CONVENTIONAL
- select the
channel number - /
3:TONE DATA
/
1:CTCSS
or
2:DCS
by rotating the
VFO
and pressing
E
. With CTCSS or DCS, Tone Lock ON is set by pressing
L/O
.
2) For Search mode, select
1:SERVICE OPTION
/
:CHAIN SEARCH
/
5:TONE DATA
/
1:CTCSS
or
2:DCS
by rotating the
VFO
and pressing
E
. With
CTCSS
or
DCS
Tone Lock ON is set by pressing
L/O
.
☞
Remember! You can also use
▲
or
▼
instead of rotating the
VFO
.
Also instead of pressing
E
, you can press the
VFO
control.
Note
:
•
To set Tone Lock OFF for either Scan mode or Search mode, press
E
instead of
pressing
L/O
on step 1) or 2) above.
•
CTCSS: Continuous Tone Coded Squelch System.
•
DCS: Digital Coded Squelch.
•
For example, the scanner shows the following displays. When Search mode and
Tone Search are selected, the display shows the frequency and tone data
alternately.
•
If the delay feature (-2 sec/-5 sec/-10 sec) has been set while in Tone search
mode, it resumes scanning according to the delay setting.
40