Uniden BC785D English Owners Manual - Page 75
Sound Quality Fine Tuning
View all Uniden BC785D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
4. Once you have adjusted the Sound Quality to the lowest possible level, press the E key. Press the RSM key to exit the Sound Quality Adjustment Mode. * To cancel the adjusted threshold level, press . (Decimal) key. * The adjusted threshold level for the current frequency can be set back to the default value by pressing and holding the . (Decimal) key. * When you change the Sound Quality it affects all other APCO P-25 signals in that same band. (UHF, VHF, or 800MHz) * You cannot enter the "Sound Quality Fine Tuning" mode when the scanner is operating as follows: 1) The receiving frequency is 0 MHz. 2) Air Band Frequency 3) BCi25D card is not inserted 4) BCi25D / P-25 monitoring is disabled 71
71
4.
Once you have adjusted the Sound Quality to the lowest possible level, press the
E
key.
Press the
RSM
key to exit the Sound Quality Adjustment Mode.
* To cancel the adjusted threshold level, press
(Decimal) key.
* The adjusted threshold level for the current frequency can be set back to the default
value by pressing and holding the
(Decimal) key.
* When you change the Sound Quality it affects all other APCO P-25 signals in that
same band. (UHF, VHF, or 800MHz)
* You cannot enter the
“
Sound Quality Fine Tuning
”
mode when the scanner is
operating as follows:
1)
The receiving frequency is 0 MHz.
2)
Air Band Frequency
3)
BCi25D card is not inserted
4)
BCi25D / P-25 monitoring is disabled
.
.