Uniden BC785D English Owners Manual - Page 84
for additional information.
View all Uniden BC785D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Problem Suggestion APCO P25 CARD NOT INSTALLED appear when the scanner is turned on. 1. Check to see if the P-25 card is properly installed. Neither APCO P25 CARD INSTALLED nor APCO P25 CARD NOT INSTALLED appear when the scanner is turned on. 1. Check to see if the APCO CARD Mode is ENABLE or DISABLE in the Menu mode (See page 68-69). Scratchy or robotic sound 1. Move to a location where the signal strength is is heard during strong. communications. Digital communication is not heard. DATA sound is heard at the beginning of digital communications. Robotic sound is heard. CARD ERROR appears every 10 seconds while you are using P-25 card. 1. Verify the accuracy of the frequencies of the P-25 system you are trying to monitor. 2. You might be in a dead-spot for the P-25 system you are trying to monitor. Check other locations in the area. 1. APCO project 25 systems can send data before voice communication. 2. Data sound can be heard when signal strength is weak. 1. Check to see if the ENC message appears on the display. The scanner doesn't monitor encrypted voice communications. 1. Re-install the P-25 Card. If you still cannot get satisfactory results while using your scanner or if you want additional information, please call or write the Uniden Parts and Service Division. The address and phone number is listed in the warranty at the end of this manual. If you would like immediate assistance, please call Customer Service at (800)297-1023. If you have internet access, you can visit scanner.uniden.com for additional information. 80