Uniden BC785D English Owners Manual - Page 51

C 010, Error, Out Of Band

Get Uniden BC785D PDF manuals and user guides View all Uniden BC785D manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

No. LCD display Icon TrunkingType Special requirements 1 Type 2 800 M Motorola Type 2 800 MHz 2 Type 1 M Motorola Type 1 a. Must program a fleet map. 3 Type 2 900 M Motorola Type 2 900 MHz 4 Type 2 UHF 5 Type 2 VHF M Motorola Type 2 UHF M Motorola Type 2 VHF b. Must program base, spacing, frequency and offset channel. 6 EDCS WIDE E EDACS Wideband 9600 baud c. Must program frequencies 7 EDCS NARROW E EDACS Narrowband 4800 baud in exact order and location. 8 EDCS SCT. E EDACS SCAT 9 LT L LTR Note: Information on APCO P-25 Systems are referred to in "APCO Project 25 Reception" on page 68. STEP 2: Programming Trunking Frequencies After you finish selecting the bank and trunk type you want to track, store the frequencies in the channels for your selected bank in your scanner. Remember that you can only store one trunking system in each bank. Important: If you are programming an EDACS or LTR trunked system, you must enter the frequencies in a specific order. Check the frequency guide included with the scanner for the frequencies in your area. For additional frequencies, check the web sites listed on page 10. 1. Press MENU. 2. Select 2:SCAN OPTION / 2:TRUNK by rotating the VFO and pressing E. 3. Select the bank number by rotating the VFO and pressing E. 4. Select 2:TRUNK CHANNEL and enter the channel number by rotating the VFO and pressing E. 5. Select 1:FREQUENCY and enter a frequency for the trunked system using the keypad and pressing E. 6. Enter the alpha tag and pressing E. (See page 49). 7 You can also change the step size in this menu. (See page 93). Note: • To clear a mistake while entering the frequency, press . (decimal key) twice, and the display is cleared. • If you enter a frequency which is out of the system's trunking range, a beep sounds and ERROR appears on the display. C 010 0000.0000 ERROR OUT OF BAND • If you enter a frequency which has been stored in another channel, you will hear a beep and the channel stored displays WARNING (Refer to "Duplicate Frequnecy Alert" on page 27). 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
Note:
Information on APCO P-25 Systems are referred to in
“
APCO Project 25 Reception
”
on page 68.
STEP 2: Programming Trunking Frequencies
After you finish selecting the bank and trunk type you want to track, store the frequencies in
the channels for your selected bank in your scanner. Remember that you can only store one
trunking system in each bank.
Important
:
If you are programming an EDACS or LTR trunked system, you must enter the
frequencies in a specific order. Check the frequency guide included with the
scanner for the frequencies in your area. For additional frequencies, check the
web sites listed on page 10.
1.
Press
MENU
.
2.
Select
2:SCAN OPTION
/
2:TRUNK
by rotating the
VFO
and pressing
E
.
3.
Select the bank number by rotating the
VFO
and pressing
E
.
4.
Select
2:TRUNK CHANNEL
and enter the channel number by rotating the
VFO
and
pressing
E
.
5.
Select
1:FREQUENCY
and enter a frequency for the trunked system using the keypad
and pressing
E
.
6.
Enter the alpha tag and pressing
E
. (See page 49).
7
You can also change the step size in this menu. (See page 93).
Note
:
•
To clear a mistake while entering the frequency, press
(decimal key) twice, and the display is cleared.
•
If you enter a frequency which is out of the system
’
s
trunking range, a beep sounds and
ERROR
appears
on the display.
•
If you enter a frequency which has been stored in another channel, you will hear a
beep and the channel stored displays
WARNING
(Refer to
“
Duplicate Frequnecy
Alert
”
on page 27).
.
47
No.
LCD display
Icon
TrunkingType
Special requirements
1
Type 2 800
M
Motorola Type 2 800 MHz
2
Type 1
M
Motorola Type 1
a. Must program a fleet map.
3
Type 2 900
M
Motorola Type 2 900 MHz
4
Type 2 UHF
M
Motorola Type 2 UHF
b. Must program base, spacing,
5
Type 2 VHF
M
Motorola Type 2 VHF
frequency and offset channel.
6
EDCS WIDE
E
EDACS Wideband 9600 baud
c. Must program frequencies
7
EDCS NARROW
E
EDACS Narrowband 4800 baud
in exact order and location.
8
EDCS SCT.
E
EDACS SCAT
9
LT
L
LTR
C 010
0000.0000
ERROR
OUT OF BAND