Uniden BCD160DN English Owners Manual - Page 45

1. Go to MENU/Tone-Out for...and press Yes/E. The Tone-Out for... screen displays 2 options: Select Tone-Out Standby if you know and use programmed tones. The active Tone-Out screen displays. Select Tone-Out Setup if you don't know the tones. 2. Scroll to Tone-Out Setup, and press Yes/E. The Select Tone-Out screen displays. 3. Scroll to Tone-Out X and press Yes/E. 4. Scroll to Edit Name and press Yes/E. Enter the tone-out name and press Yes/E. 5. Scroll to Set Frequency and press Yes/E. 6. At Edit Frequency, press Yes/E. Enter the frequency to monitor for Tone-Out and press Yes/E to save and exit. 7. Scroll to Set Modulation and press Yes/E. 8. Scroll to Auto, NFM, or FM and press Yes/E to save and exit. 9. Scroll to Set Attenuator and press Yes/E. 10. Scroll to On or Off and press Yes/E to save and exit. 11. Press MENU to return to Tone-Out X options. 12. Scroll to Set Tone and press Yes/E. NOTES: For two-tone pages, enter the tones (in Hz) for Tone A and Tone B. For one-tone pages using short tones between 1.25 and 3.75 seconds, enter tone for tone A and 0 for B. For long-tone pages, such as group pages of more than 3.75 seconds, enter 0 for A and the tone for B. To search for tones, leave the tones for A and B at 0. 1. From Set Tone, scroll to Edit Tone A and press Yes/E. 2. Enter the tone and press Yes/E to save and exit. 3. Scroll to Edit Tone B and press Yes/E. 4. Enter the tone and press Yes/E to save. 5. Press MENU to return to Tone-Out x options. 6. Scroll to Set Delay Time and press Yes/E. 7. Scroll to one of the following settings and press Yes/E to save and exit. • 0 - the scanner resumes standby as soon as the carrier drops after a page. 45