Uniden BCD160DN English Owners Manual - Page 47
In Tone-out Standby Mode
View all Uniden BCD160DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
2. Scroll to Tone-Out Standby and press Yes/E. The Tone Out screen displays. NOTE: You can also assign Tone-Out to 1 of 3 Search (sr) keys. 3. The Tone-Out name, channel number (1-10), and tone settings display. Any transmission received on that frequency will not be heard but you will still see signal strength bars. All Tone-Outs (channels) that have the same frequency (and modulation/attenuation) as the one you select will also (and only) be monitored so you can monitor up to 10 Tone-Out channels for one frequency. In this case, the scanner displays each Tone-Out channel for two seconds. It does not scan them; Tone-Out monitors the frequency for all Tone-Out channels with the same frequency. Regardless of the current display, the scanner will alert on any received tone-out that matches a stored setting (channel) for the frequency. If you press Hold while in Standby/Search mode, the scanner temporarily exits and you will be able to hear any transmissions on that frequency. No alerts sound, even if a Tone-Out matches one you have programmed in Hold mode. Press Hold again to return to Standby/Search mode. IN TONE-OUT STANDBY MODE • To select another Tone-Out, turn the scroll control. • To save found tones in Tone-Out Search mode, press Yes/E at Save Found Tones? • To turn Intermediate Frequency Exchange on or off, press FUNC then ifx/4. • To turn attenuation on or off, press FUNC then att/7. • To toggle modulation, press FUNC then mod/9. 47