Uniden BCD160DN English Owners Manual - Page 53

1. From MENU/Settings, select Set Backlight and press Yes/E. 2. Select Set Mode and press Yes/E. 3. Scroll to one of the five options and press Yes/E to select it: • 10 sec - The backlight stays on for 10 seconds after pressing . • 30 sec - The backlight stays on for 30 seconds after pressing . • Squelch - The backlight turns on when squelch opens and stays on for 5 seconds. • Keypress - The backlight turns on when any key is pressed and stays on for 10 seconds. • Infinite - The backlight turns on after you press you press again. and stays on until 4. Scroll to Set Dimmer and press Yes/E to select it. Three options display. 5. Scroll to High, Middle, or Low and press Yes/E to select it. Press Menu to return. ADJUST KEY BEEP This setting turns key beep on and off and adjusts its volume level. 1. From MENU/Settings, scroll to Adjust Key Beep and press Yes/E. 2. Select Set Level and press Yes/E. 3. Key beep options are Auto (the scanner sets the alert beep to the master volume level), Level 1 - 15 (the scanner sounds the level as you scroll through the levels), and Off. Scroll to a selection and press Yes/E to select it and return to the Settings menu. BATTERY OPTIONS Battery options allow you to turn the battery save option on or off and to set the battery charge time. Set Battery Save The scanner turns power off for 1 second and turns it back on for 300 ms when you hold on a channel/frequency that has no activity for longer than 1 minute. NOTE: No icon appears on the display to indicate Battery Save status (On or Off). 1. From Menu/Settings/Battery Option, scroll to Set Battery Save and press Yes/E. 2. Select On or Off and press Yes/E to save and exit. Set Battery Charge Time 1. From Menu/Settings/Battery Option, scroll to Set Charge Time and press Yes/E. 53