Uniden BCD436HP English Owner's Manual - Page 38

S0-9 Display the first digit of the current System quick key on the left with the blinking second digit on the right. A non-blinking number on the right indicates the quick key is enabled waiting to be scanned. A - (dash) means nothing is assigned to the quick key. An * (asterisk) means the quick key is disabled. 0-9 displays the Custom Search key status in Search mode. Date Displays the date. Receive Mode Receive mode in Function mode. Volume Offset Volume Offset for the channel in Function mode. IFX Displays if Intermediate Exchange is enabled for the channel. ATT Displays to show channel attenuation in Receiving/Hold modes and in Search mode to show search attenuation. ATT blinks to indicate global attenuation. P25 Displays if the channel is receiving digitalized voice in Receiving or Hold modes. LNK Displays when data is received on a voice channel in Receiving or Hold modes. DAT Displays when data is received on a control channel in Receiving or Hold modes. ENC Displays if the channel is receiving encrypted voice and is muted in Receiving or Hold modes. WX Displays if the Weather Alert Priority feature is on. V=NN Displays the volume level for three seconds when you turn VOL. System Name Displays in Receiving/Hold modes. Avoid/Hold Temporary avoids appear reversed - . Search with Scan Displays to show a custom search in Scan mode. Custom Search Displays in Search mode. Name Department Name Avoid/Hold Status displays in Receiving/Hold modes. Temporary avoids appear reversed - . Displays for a conventional system in Scan mode. Displays for a system in Receiving/Hold modes. Custom Search Displays in Search with Scan mode. Name Site Name Displays for a trunked system in Scan mode. Department Name Displays the Department Name. Search Frequency Displays in Search mode. Modulation Displays in Search mode. Scanning Displays for a conventional system in Scan mode. 30