Uniden BCD996T English Owners Manual - Page 130
If you have Internet access, you can visit, for additional information.
UPC - 050633650486
View all Uniden BCD996T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Problem Scanner won't acquire the data channel. Possible Cause The squelch might need to be adjusted. Suggestion Adjust the squelch threshold. See "Turning On the Scanner and Setting the Squelch" on Page 45. Missing replies to conversations. The frequency used for the data channel might be missing. The scanner might need to be changed to a Type 1 scanner setup. Check your frequency list for the data channel. Change to a Type 1 scanner setup. See the programming instructions on the web at www.uniden.com/scanners. The fleet map might be incorrect. Try another preset fleet map or program your own fleet map. One or more of the system's frequencies might not be entered. The system you are trying to scan might be LTR or EDACS. Make sure all the system's frequencies have been entered. Set the scanner to scan LTR or EDACS systems. See the programming instructions on the web at www.uniden.com/scanners. If you still cannot get satisfactory results while using your scanner or if you want additional information, please call or write the Uniden Parts and Service Division. The address and phone number are listed in the Warranty at the end of this manual. If you would like immediate assistance, please call Customer Service at (800) 297-1023. If you have Internet access, you can visit http://www.uniden.com for additional information. 130