Uniden BCD996T English Owners Manual - Page 82
Setting Site Location Information, Adjust P25 Level, Set C-Ch Only, Program System, Edit Site current
UPC - 050633650486
View all Uniden BCD996T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Select a non-P25 site F Set C-Ch Only F This setting determines the frequencies you need to enter for Motorola systems. Select your setting, then press F. On - You only need to enter control channel frequencies. Off - You must enter all voice and control channel frequencies. Note: The scanner defaults to On. Setting Site Location Information [MENU] Program System F Select a trunked system F Edit Site (current) F Select a site F Set LocationInfo F MESL This setting control whether the system is automatically enabled and disabled when you connect a GPS to the scanner. Set Latitude - Enter the system's latitude using the format you selected in the system settings. Set Longitude - Enter the system's longitude using the format you selected in the system settings. Set Range - Set the system's range using the units you selected in the system settings. Set GPS Enable - Depending on the data received from the GPS, the L/O status of the site is automatically controlled. Adjust P25 Level [MENU] Program System F Select a trunked system F Edit Site (current) F Select a site F Adjust P25 Level F MEL This setting determines some site-specific parameters for digital channels. In most cases, setting this to Auto provides the best performance. However, you can also 82