Vantec UGT-ST310R User Guide - Page 12

UGT-ST310R, when prompted

Get Vantec UGT-ST310R - SATA II 150 PCI Host Card PDF manuals and user guides View all Vantec UGT-ST310R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

Enter. 3. Select RAID5, then press Enter. 4. Select the number of drives then press Enter. 5. Select Auto configuration, then press Enter. 6. Input the RAID size, press Enter. 7. When asked Are You Sure(Y/N)?, press Y to accept. 8. Press Ctrl+E to exit the BIOS. 9. When asked Are you sure to exit(Y/N)?, press Y to exit and reboot 10. Continue with FDISK and FORMAT steps as if you were installing a conventional hard drive. Manual configuration 1. As the BIOS boots press Ctrl+S or F4 when prompted to enter the RAID BIOS. 2. At the next screen select Create RAID Set, then press Enter. 3. Select RAID5, then press Enter. 4. Select the number of drives then press Enter. 5. Select Manual configuration then press Enter. 6. Select chunk size from 8k, 16k, 32k, 64 or 128k, then press Enter. 7. Select the first drive, press Enter. 8. Select the second drive, press Enter. 9. Select the third drive, press Enter. 10. If applicable select the 4th drive pressing enter after each selection. 11. Input the RAID size, press Enter. 12. When asked Are You Sure(Y/N)?, press Y to accept. 13. Press Ctrl+E to exit the BIOS. 14. When asked Are you sure to exit(Y/N)?, press Y to exit UGT-ST310R Page 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
UGT-ST310R
Page 12
Enter
.
3.
Select
RAID5
, then press
Enter
.
4.
Select the number of drives then press
Enter
.
5.
Select
Auto configuration
, then press
Enter
.
6.
Input the RAID size, press
Enter
.
7.
When asked
Are You Sure(Y/N)?
, press
Y
to accept.
8.
Press
Ctrl+E
to exit the BIOS.
9.
When asked
Are you sure to exit(Y/N)?
, press
Y
to exit
and reboot
10. Continue with FDISK and FORMAT steps as if you were
installing a conventional hard drive.
Manual configuration
1.
As the BIOS boots press
Ctrl+S
or
F4
when prompted to
enter the RAID BIOS.
2.
At the next screen select
Create RAID Set
, then press
Enter
.
3.
Select
RAID5
, then press
Enter
.
4.
Select the number of drives then press
Enter
.
5.
Select
Manual configuration
then press
Enter
.
6.
Select chunk size from
8k, 16k, 32k, 64
or
128k
, then press
Enter
.
7.
Select the
first drive
, press
Enter
.
8.
Select the
second drive
, press
Enter
.
9.
Select the
third drive
, press
Enter
.
10. If applicable select the
4th
drive pressing enter after each
selection.
11. Input the RAID size, press
Enter
.
12. When asked
Are You Sure(Y/N)?
, press
Y
to accept.
13. Press
Ctrl+E
to exit the BIOS.
14. When asked
Are you sure to exit(Y/N)?
, press
Y
to exit