Vantec UGT-ST310R User Guide - Page 6
RAID Arrays, RAID 0 (Striping), New/Blank, Auto Configuration, Ctrl+S, Create RAID Set, Enter
View all Vantec UGT-ST310R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
drive. 4. Attach the other end of the Serial ATA cable to the Serial ATA controller on the 6-Port SATA II 150 PCI Host Card w/RAID. 5. Follow the same instructions to connect up to four hard drives. Device connection is now complete. 6. Replace the computer cover and reconnect the power cord. RAID Arrays RAID Arrays are setup in the 6-Port SATA II 150 PCI Host Card w/RAID's BIOS. RAID 0 (Striping) This RAID array to be used on New/Blank hard drives. Striping will destroy existing data on the hard drive. Auto Configuration is recommended. For applications that require custom chunk size, Manual Configuration is offered. Auto configuration (recommended) The default chunk size is 64k when selecting Auto configuration. 1. As the BIOS boots press Ctrl+S or F4 when prompted to enter the RAID BIOS. 2. At the next screen select Create RAID Set, then press Enter. UGT-ST310R Page 6