Vantec UGT-ST310R User Guide - Page 14
Resolving Conflicts, Low Level Format, Logical Drive Info, is build into the RAID BIOS to make it more
View all Vantec UGT-ST310R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
2. Select Delete RAID Set, then press Enter. 3. Select the RAID set then press Enter. 4. When asked Are You Sure(Y/N)?, press Y to confirm. Resolving Conflicts When a RAID set is created, then metadata written to the disk includes drive connection information. If, after a disk failure, the replacement disk was previously part of a RAID set (or used in another system), it may have conflicting metadata. If so, this will prohibit the RAID set from being either created or rebuilt, in order for the RAID set to function properly, this old metadata must be first overwritten with the new metadata. To resolve this, from the main BIOS window select Resolve Conflicts, then press Enter, the correct metadata, including the correct drive connection information, will be written to the replacement disk. Low Level Format Low Level Format is build into the RAID BIOS to make it more convenient to erase the entire contents of a hard disk drive, including data, drive and partition information. The Low Level Format utility works on single hard drive only, before the RAID set is configured. Logical Drive Info This menu item allows the display of the assignment of physical drives within a logical set (RAID0, RAID1, etc.). This is display only function. UGT-ST310R Page 14