Vantec UGT-ST310R User Guide - Page 7

Manual configuration, UGT-ST310R

Get Vantec UGT-ST310R - SATA II 150 PCI Host Card PDF manuals and user guides View all Vantec UGT-ST310R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

3. Select RAID0, then press Enter. 4. Select the number of drives then press Enter. 5. Select Auto configuration, then press Enter. 6. Input the RAID size, press Enter. 7. When asked Are You Sure (Y/N)?, press Y to accept. 8. Press Ctrl+E to exit the BIOS. 9. When asked Are you sure to exit (Y/N)?, press Y to exit and reboot. 10. Continue with FDISK and FORMAT steps as if you were installing a conventional hard drive. Manual configuration 1. As the BIOS boots press Ctrl+S or F4 when prompted to enter the RAID BIOS. 2. At the next screen select Create RAID Set, then press Enter. 3. Select RAID0, then press Enter. 4. Select the number of drives then press Enter. 5. Select Manual configuration then press Enter 6. Select chunk size from 8k, 16k, 32k, 64k or 128k, then press Enter. 7. Select the first drive, press Enter. 8. Select the second drive, press Enter. 9. If applicable select the 3rd and 4th drives pressing enter after each selection. 10. Input the RAID size, press Enter. 11. When asked Are You Sure(Y/N)?, press Y to accept. 12. Press Ctrl+E to exit the BIOS. 13. When asked Are you sure to exit(Y/N)?, press Y to exit and reboot. 14. Continue with FDISK and FORMAT steps as if you were installing a conventional hard drive. UGT-ST310R Page 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
UGT-ST310R
Page 7
3.
Select
RAID0
, then press
Enter
.
4.
Select the number of drives then press
Enter
.
5.
Select
Auto configuration
, then press
Enter
.
6.
Input the RAID size, press
Enter
.
7.
When asked
Are You Sure (Y/N)?
, press
Y
to accept.
8.
Press
Ctrl+E
to exit the BIOS.
9.
When asked
Are you sure to exit (Y/N)?
, press
Y
to exit
and reboot.
10.
Continue with FDISK and FORMAT steps as if you were
installing a conventional hard drive.
Manual configuration
1.
As the BIOS boots press
Ctrl+S
or
F4
when prompted to
enter the RAID BIOS.
2.
At the next screen select
Create RAID Set
, then press
Enter
.
3.
Select
RAID0
, then press
Enter
.
4.
Select the number of drives then press
Enter
.
5.
Select
Manual configuration
then press
Enter
6.
Select chunk size from
8k
,
16k
,
32k
,
64k
or
128k
, then
press
Enter
.
7.
Select the
first drive
, press
Enter
.
8.
Select the
second drive
, press
Enter
.
9.
If applicable select the
3rd
and
4th
drives pressing enter
after each selection.
10.
Input the RAID size, press
Enter.
11.
When asked
Are You Sure(Y/N)?
, press
Y
to accept.
12.
Press
Ctrl+E
to exit the BIOS.
13.
When asked
Are you sure to exit(Y/N)?
, press
Y
to exit
and
reboot.
14.
Continue with FDISK and FORMAT steps as if you were
installing a conventional hard drive.