ViewSonic LS620X LS620X User Guide English - Page 43

Using the projector in standby mode, Adjusting the sound, Turning off the Power On/Off Ring Tone

Get ViewSonic LS620X PDF manuals and user guides View all ViewSonic LS620X manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Using the projector in standby mode Some of the projector functions are available in standby mode (plugged in but not turned on). To use these functions, be sure the cable connections are correctly made. For the connection methods, see the Connection chapter. Active VGA Out Selecting On in the SYSTEM SETUP: Advanced > Standby Settings > Active VGA Out outputs a VGA signal when the COMPUTER 1 and COMPUTER OUT sockets are correctly connected to devices. The projector outputs the signal received only from COMPUTER 1. LAN Control Making the following settings in the SYSTEM SETUP: Advanced > Standby Settings > Network allows the projector to provide the network function when it is in standby mode. See "Controlling the projector through a LAN environment" on page 31 for details. • Enable Network Standby Mode: Allows the projector to provide the network function in standby mode. • Auto Disable Network Standby Mode: Allows the projector to disable the network function after a set period of time after it enters standby mode. For instance, if 20 min is selected, the projector is able to provide the network function for 20 minutes after it enters standby mode. When 20 minutes is up, the projector enters normal standby mode. Adjusting the sound The sound adjustments made as below will have an effect on the projector speaker. Be sure you have made a correct connection to the projector audio input/output jacks. See "Connection" on page 12 for more details. Muting the sound 1. Open the OSD menu and go to the SYSTEM SETUP: Advanced > Audio Settings > Mute menu. 2. Press / to select On. If available, you can press on the remote control. Adjusting the sound level 1. Open the OSD menu and go to the SYSTEM SETUP: Advanced > Audio Settings > Volume menu. 2. Press / to select a desired sound level. If available, you can press / on the remote control to adjust the projector's sound level. Turning off the Power On/Off Ring Tone 1. Open the OSD menu and go to the SYSTEM SETUP: Advanced > Audio Settings > Power On/Off Ring Tone menu. 2. Press / to select Off. The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound mute or changing the sound level will not affect the Power On/Off Ring Tone. 38

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
38
Using the projector in standby mode
Some of the projector functions are available in standby mode (plugged in but not turned
on). To use these functions, be sure the cable connections are correctly made. For the
connection methods, see the
Connection
chapter.
Active VGA Out
Selecting
On
in the
SYSTEM SETUP: Advanced
>
Standby Settings > Active VGA Out
outputs a VGA signal when the
COMPUTER 1
and
COMPUTER OUT
sockets are
correctly connected to devices. The projector outputs the signal received only from
COMPUTER 1
.
LAN Control
Making the following settings in the
SYSTEM SETUP: Advanced
>
Standby Settings >
Network
allows the projector to provide the network function when it is in standby mode.
See
"Controlling the projector through a LAN environment" on page 31
for details.
•
Enable Network Standby Mode
: Allows the projector to provide the network
function in standby mode.
•
Auto Disable Network Standby Mode:
Allows the projector to disable the
network function after a set period of time after it enters standby mode. For
instance, if 20 min is selected, the projector is able to provide the network
function for 20 minutes after it enters standby mode. When 20 minutes is up, the
projector enters normal standby mode.
Adjusting the sound
The sound adjustments made as below will have an effect on the projector speaker. Be sure
you have made a correct connection to the projector audio input/output jacks. See
"Connection" on page 12
for more details.
Muting the sound
1.
Open the OSD menu and go to the
SYSTEM SETUP: Advanced
>
Audio Settings
>
Mute
menu.
2.
Press
/
to select
On
.
If available, you can press
on the remote control.
Adjusting the sound level
1.
Open the OSD menu and go to the
SYSTEM SETUP: Advanced
>
Audio Settings
>
Volume
menu.
2.
Press
/
to select a desired sound level.
If available, you can press
/
on the remote control to adjust the projector’s sound level.
Turning off the Power On/Off Ring Tone
1.
Open the OSD menu and go to the
SYSTEM SETUP: Advanced
>
Audio Settings
>
Power On/Off Ring Tone
menu.
2.
Press
/
to select
Off
.
The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound
mute or changing the sound level will not affect the Power On/Off Ring Tone.