ViewSonic PJD7325 PJD6252L User Guide English - Page 49
Auto Power Off, Smart Restart, Direct Power On, Power Saving, Disable, Sleep Timer
View all ViewSonic PJD7325 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
CEC This projector supports CEC (Consumer Electronics Control) function for synchronized power on/off operation via HDMI connection. That is, if a device that also supports CEC function is connected to the HDMI input of the projector, when the projector's power is turned off, the power of the connected device will also be turned off automatically. When the power of the connected device is turned on, the projector's power will be turned on automatically. Note • When connected to the HDMI input of the projector via an HDMI cable, and its CEC function is turned on. • Depending on the connected device, the CEC function may not work. • The function can't be enabled when Active VGA out/Active Audio out function is disabled. Direct Power On Selecting On the projector will turn on automatically after the power cord has been connected and power has been applied. Auto Power Off Power Saving The projector lowers the projector power if no input source is detected after 5 minutes to prevent unnecessary waste of lamp life. You can further decide if you would like the projector to turn off automatically after a set period of time. When Disable is selected, the projector power will be reduced to 30% after no signal is detected for 5 minutes. If you select 10 min, 20 min or 30 min, the projecter power will be reduced to 30% after no signal is detected for 5 minutes. And when 10 min, 20 min or 30 min is up, the projector will turn off automatically. Sleep Timer This function allows the projector to turn off automatically after a set period of time to prevent unnecessary waste of lamp life. Smart Restart It takes some time to initate this function. Make sure the projector has been turned on for more than 4 minutes. If the projector is resumed by using the Smart Restart feature, this function can be executed immediately. Quick Power Off • Enable: Quick power on function speeds up the cooling process when turning off the projector. • Disable: Turn off with cooling procedure. Note • When Disable is selected, the Smart Restart function will be automatically turned Off. 38