ViewSonic PJD7325 PJD6252L User Guide English - Page 55

Controlling the projector through a LAN environment, Projector IP Address

Get ViewSonic PJD7325 PDF manuals and user guides View all ViewSonic PJD7325 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Controlling the projector through a LAN environment You can manage and control the projector from one or more remote computers when they are properly connected to the same local area network. Internet IP Router If you are in a DHCP on environment: 1. Take a RJ45 cable and connect one end to the RJ45 LAN input jack of the projector and the other end to the RJ45 port on your Ethernet or router. 2. Press Menu and then go to SOURCE > LAN Control Settings menu. 3. Make sure the LAN Settings is DHCP on. 4. Press to highlight Apply and press Enter. 5. Please wait for around 15 - 20 seconds, and then re-enter the Wired LAN page. The Projector IP Address, Subnet Mask, Default Gateway and DNS Server settings will be displayed. Note down the IP address displayed in the Projector IP Address row. Important • If the Projector IP Address still does not appear, contact your network administrator. • If the RJ45 cables are not properly connected, the Projector IP Address, Subnet Mask, Default Gateway and DNS Server settings will display 0.0.0.0. Make sure the cables are properly connected and perform the procedures above again. • If you wish to connect to the projector in its standby mode, be sure you have selected RJ45 and obtained the Projector IP Address, Subnet Mask, Default Gateway and DNS Server information when the projector is on. If you are in a Static IP environment: 1. Repeat steps 1-2 above. 2. Make sure the LAN Settings is Static IP. 3. Contact your ITS administrator for information on the Projector IP Address, Subnet Mask, Default Gateway, and DNS Server settings. 4. Press to select the item you want to modify and press Enter. 5. Press / to move the cursor and the enter the value. 6. To save the settings, press Enter. If you do not want to save the settings, press Exit. 7. Press to highlight Apply and press Enter. 44

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
44
Controlling the projector through a LAN environment
You can manage and control the projector from one or more remote computers when
they are properly connected to the same local area network.
If you are in a DHCP on environment:
1.
Take a RJ45 cable and connect one end to the RJ45 LAN input jack of the
projector and the other end to the RJ45 port on your Ethernet or router.
2. Press
Menu
and then go to
SOURCE
>
LAN Control Settings
menu.
3.
Make sure the
LAN Settings
is
DHCP on
.
4. Press
to highlight
Apply
and press
Enter
.
5.
Please wait for around 15 - 20 seconds, and then re-enter the Wired LAN page.
The
Projector IP Address
,
Subnet Mask
,
Default Gateway
and
DNS Server
settings will be displayed. Note down the IP address displayed in the
Projector IP
Address
row.
Important
•
If the Projector IP Address still does not appear, contact your network administrator.
•
If the RJ45 cables are not properly connected, the Projector IP Address, Subnet Mask,
Default Gateway and DNS Server settings will display 0.0.0.0. Make sure the cables are
properly connected and perform the procedures above again.
•
If you wish to connect to the projector in its standby mode, be sure you have selected
RJ45 and obtained the Projector IP Address, Subnet Mask, Default Gateway and DNS
Server information when the projector is on.
If you are in a Static IP environment:
1.
Repeat steps 1-2 above.
2.
Make sure the
LAN Settings
is
Static IP
.
3.
Contact your ITS administrator for information on the
Projector IP Address
,
Subnet Mask
,
Default Gateway
, and
DNS Server
settings.
4. Press
to select the item you want to modify and press
Enter
.
5.
Press
/
to move the cursor and the enter the value.
6.
To save the settings, press
Enter
. If you do not want to save the settings, press
Exit
.
7. Press
to highlight
Apply
and press
Enter
.
Internet
IP Router