Viking RDSCE2305BSS Installation Instructions - Page 11
Anti-tip Device Installation, Wall Mount Anti-tip Installation, TIPPING HAZARD
View all Viking RDSCE2305BSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Leveling/Adjustments/Alignment (cont.) 7 Set the high corner of range so that the top of side trim is 3/8" (0.95 cm) above countertop. Level range to high corner. Anti-tip Device Installation WARNING TIPPING HAZARD • THIS RANGE CAN TIP. • A CHILD OR ADULT CAN TIP THE RANGE AND BE KILLED. • FAILURE TO INSTALL THE ANTI-TIP DEVICE CAN RESULT IN DEATH OR SERIOUS BURNS TO CHILDREN OR ADULTS. • IF THE RANGE IS MOVED THEN THE ANTI-TIP DEVICE MUST BE RE-ENGAGED. Your range is shipped standard with two types of anti-tip devices. Type 1 is a wall mount device which can be used for all installation applications. WARNING TIPPING HAZARD To reduce the risk of the appliance tipping, it must be secured by a properly installed anti-tip bracket(s). To make sure the bracket has been installed properly, look behind the range with a flashlight to verify proper installation engaged in the rear top left corner of the range or under the range to verify that a floor hook and bracket have been installed. Wall Mount Anti-tip Installation 1 Type 2 is a floor mount device which can be used for all applications other than (A) when the range is installed on a concrete sub-floor. Important - The range MUST be installed with one of the anti-tip devices. Measure from floor to bottom of the anit-tip opening located on the back of range. This will be measurement (A). 20 2 3 3(9-.52/c8m") +1/2"(A(1).3 cm) Locate anti-tip bracket on rear wall with the top left corner at measurement (A) plus 1/2" (1.3 cm) from the floor and 3-5/8" (9.2 cm) from where the right side of range (facing range) is to be located. 4 1 Mark and drill holes where bracket will be located. 2 Attach bracket with mounting hardware provided. Floor Mount Anti-tip Installation 1 (3.81-c1m/)2" (281-1.6/2cm" ) Ø(.321/c8m") Locate anti-tip bracket hook on the floor 8-1/2" (21.6 cm) from side cabinet and 1-1/2" (3.8 cm) from rear wall. Mark and drill 1/8" (.32 cm) holes where bracket will be located. 21 2 1 1 2 Mount anti-tip bracket hook to floor using screws provided.