Viking RDSCE2305BSS Installation Instructions - Page 2

Important Safety Instructions, Read and Follow

Page 2 highlights

Table of Contents Warnings & Important Safety Instructions 3 Dimensions 6 Specifications 7 Clearance Dimensions (Proximity to Cabinets 8 Clearance Dimensions (Wood/Composite Overlay 9 Electrical Requirements 10 General Information 12 Installation 13 Backguard Installation 13 Door Removal 13 Leg Installation 14 Electrical Connection (3-wire 15 Electrical Connection (4-wire 17 Leveling/Adjustments/Alignment 19 Anti-tip Device Installation 20 Wall Mount Anti-tip Installation 20 Floor Mount Anti-tip Installation 21 Final Installation 22 Door Replacement and Adjustment 23 Final Preparation 24 Performance Checklist 24 Service & Registration 25 2 IMPORTANT-Read and Follow! • Before beginning, please read these instructions completely and carefully. • Do not remove permanently affixed labels, warnings, or plates from product. This may void the warranty. • All local and national codes and ordinances must be observed. Installation must conform with local codes or in the absence of codes, the National Fuel Gas Code ANSIZ223.1/NFPA-54 -latest edition. • The installer must leave these instructions with the consumer who should retain for local inspector's use and for future reference. In Canada: Installation must be in accordance with the current CSA C22.1 Canadian Electrical Codes Part 1 and/or local codes. Your safety and the safety of others is very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to hazards that can kill or hurt you and others. All safety messages will be preceded by the safety alert symbol and the word "DANGER," "WARNING" or "CAUTION." These words mean: DANGER Hazards or unsafe practices which WILL result in severe personal injury or death WARNING Hazards or unsafe practices which COULD result in severe personal injury or death CAUTION Hazards or unsafe practices which COULD result in minor personal injury or property damage. All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed. 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14

IMPORTANT
3
2
Table of Contents
Warnings & Important Safety Instructions _______________________________________________3
Dimensions _________________________________________________________________________6
Specifications _______________________________________________________________________7
Clearance Dimensions (Proximity to Cabinets) ___________________________________________8
Clearance Dimensions (Wood/Composite Overlay) ______________________________________9
Electrical Requirements _____________________________________________________________10
General Information ________________________________________________________________12
Installation_________________________________________________________________________13
Backguard Installation _______________________________________________________13
Door Removal ______________________________________________________________13
Leg Installation______________________________________________________________14
Electrical Connection (3-wire) _________________________________________________15
Electrical Connection (4-wire) _________________________________________________17
Leveling/Adjustments/Alignment ______________________________________________19
Anti-tip Device Installation____________________________________________________20
Wall Mount Anti-tip Installation _______________________________________________20
Floor Mount Anti-tip Installation_______________________________________________21
Final Installation _____________________________________________________________22
Door Replacement and Adjustment ___________________________________________23
Final Preparation ___________________________________________________________________24
Performance Checklist ______________________________________________________________24
Service & Registration_______________________________________________________________25
• Before beginning, please read these
instructions completely and carefully.
• Do not remove permanently affixed labels,
warnings, or plates from product. This may
void the warranty.
• All local and national codes and ordinances
must be observed. Installation must
conform with local codes or in the absence
of codes, the National Fuel Gas Code
ANSIZ223.1/NFPA-54 –latest edition.
• The installer must leave these instructions
with the consumer who should retain for
local inspector’s use and for future reference.
In Canada:
Installation must be in accordance
with the current CSA C22.1 Canadian
Electrical Codes Part 1 and/or local codes.
Your safety and the safety of others is
very important.
We have provided many important safety
messages in this manual and on your
appliance. Always read and obey all
safety messages.
This is the safety alert symbol. This
symbol alerts you to hazards that
can kill or hurt you and others.
All safety messages will be preceded by
the safety alert symbol and the word
“DANGER,” “WARNING” or “CAUTION.”
These words mean:
Hazards or unsafe practices
which WILL result in severe personal
injury or death
DANGER
Hazards or unsafe practices
which COULD result in severe personal
injury or death
Hazards or unsafe practices which
COULD result in minor personal injury or
property damage.
All safety messages will identify the
hazard, tell you how to reduce the chance
of injury, and tell you what can happen if
the instructions are not followed.
WARNING
CAUTION
Read and Follow!