Weider 350 Bench English Manual - Page 5

PART IDENTIFICATION CHART Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is the key number of the part, from the PART LIST near the end of this manual. Note: Some small parts may have been preattached. If a part is not in the parts bag, check to see if it has been preattached. M10 x 183mm Bolt (98) M8 Nylon Locknut (81) M10 x 75mm Bolt (39) M8 x 70mm Bolt (93) M10 Nylon Locknut (80) M6 Washer (96) M8 x 10mm Set Screw (99) M8 Washer (84) M8 x 18mm Bolt (90) M10 Washer (83) M10 x 20mm Bolt (89) M4 x 13mm Self-tapping Screw (94) M8 x 22mm Shoulder Bolt (101) M6 x 16mm Screw (95) M10 x 25mm Bolt (86) M10 x 68mm Bolt (85) M8 x 65mm Bolt (79) M10 x 62mm Bolt (88) M10 x 62mm Carriage Bolt (97) M6 x 63mm Screw (87) M8 x 60mm Bolt (91) M10 x 48mm Bolt (92) M6 x 40mm Screw (100) 5