Weider Club 4870 English Manual - Page 11

Attach the Left Top Frame 4 to the Left Upright - weight

Get Weider Club 4870 PDF manuals and user guides View all Weider Club 4870 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

10. Attach the Left Top Frame (4) to the Center Upright (9) with two M10 x 70mm Bolts (57), two M10 Washers (108), and an M10 Nylon Locknut (84). Do not tighten the Bolts yet. Attach the Left Top Frame (4) to the Left Upright (8) with two M10 x 90mm Bolts (102) and two M10 Nylon Locknuts (84). Do not tighten the Nylon Locknuts yet. 10 57 108 4 84 9 102 84 8 11. Attach the Butterfly Frame (24) to the Right Top 11 Frame (3) with two M10 x 65mm Bolts (87) and an M10 Nylon Locknut (84). Do not tighten the Bolts yet. Attach the Butterfly Frame (24) to the Right Upright (7) with two M10 x 35mm Screws (89). Do not tighten the Screws yet. 87 3 24 84 12. Orient a Weight Guide (30) with the indicated hole closer to the bottom. Attach the Weight Guide to the Center Base (5) with an M10 x 65mm Bolt (87), two M10 Washers (108), a 1/2" Bushing (68), and an M10 Nylon Locknut (84). Slide a Weight Bumper (66) onto the Weight Guide. Attach the other Weight Guide (30) to the Center Base (5) in the same manner. Tighten the M10 x 70mm Bolts (57) used in step 2. 89 12 7 30 30 Hole 66 84 108 68 5 108 87 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
11
11.
Attach the Butterfly Frame (24) to the Right Top
Frame (3) with two M10 x 65mm Bolts (87) and
an M10 Nylon Locknut (84).
Do not tighten the
Bolts yet.
Attach the Butterfly Frame (24) to the Right
Upright (7) with two M10 x 35mm Screws (89).
Do not tighten the Screws yet.
10. Attach the Left Top Frame (4) to the Center
Upright (9) with two M10 x 70mm Bolts (57), two
M10 Washers (108), and an M10 Nylon Locknut
(84).
Do not tighten the Bolts yet.
Attach the Left Top Frame (4) to the Left Upright
(8) with two M10 x 90mm Bolts (102) and two
M10 Nylon Locknuts (84).
Do not tighten the
Nylon Locknuts yet.
10
4
9
8
84
108
57
102
84
7
11
24
84
87
89
3
30
30
12
66
68
87
5
84
108
108
Hole
12. Orient a Weight Guide (30) with the indicated
hole closer to the bottom. Attach the Weight
Guide to the Center Base (5) with an M10 x
65mm Bolt (87), two M10 Washers (108), a 1/2”
Bushing (68), and an M10 Nylon Locknut (84).
Slide a Weight Bumper (66) onto the Weight
Guide.
Attach the other Weight Guide (30) to the
Center Base (5) in the same manner.
Tighten the M10 x 70mm Bolts (57) used in
step 2.