Weider Club 4870 English Manual - Page 16

27. Wrap the Butterfly Cable (73) around a Pulley (43). Attach the Pulley, a Cable Trap (48), an M10 Washer (108), and two Guards (45) to the Right Butterfly Arm (23) with an M10 x 50mm Bolt (105) and an M10 Nylon Locknut (84). Make sure that the Cable Trap is oriented to hold the Cable in the groove of the Pulley. 27 84 45 48 43 73 108 45 23 28. Wrap the Butterfly Cable (73) under a "V"-pulley 28 (44). Attach the "V"-pulley, a Long Cable Trap (83), an M10 Washer (108), and two Guards (45) to the Right Upright (7) with an M10 x 150mm Bolt (94) and an M10 Nylon Locknut (84). Make sure that the Cable Trap is oriented to hold the Cable in the groove of the "V"-pulley. 29. Wrap the Butterfly Cable (73) over a Pulley (43). 29 Attach the Pulley to the Right Top Frame (3) with an M10 x 40mm Bolt (104) and an M10 Nylon Locknut (84). 105 84 44 73 45 45 83 108 7 94 84 43 73 3 104 30. Wrap the Butterfly Cable (73) under a Pulley (43). 30 Attach the Pulley, a Cable Trap (48), and two Half Guards (46) at the second hole from the top of the two Pulley Plates (49) with an M10 x 50mm Bolt (105) and an M10 Nylon Locknut (84). Make sure that the Cable Trap is oriented to hold the Cable in the groove of the Pulley. Make sure the Half Guards are oriented as shown. 16 84 48 73 46 46 105 49 43 49