Weider Pro 4250 English Manual - Page 12

Cable Assembly

Get Weider Pro 4250 PDF manuals and user guides View all Weider Pro 4250 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

19. Attach a Press Arm (30) to the Press Frame (29) 19 with two M8 x 66mm Bolt (86) and two M8 Nylon Locknuts (91). Repeat this step with the other Press Arm (30). 86 30 20. Grease an M10 x 106mm Bolt (72). Attach the 20 Leg Press Frame (28) to the Left Base (25) with the Bolt and an M10 Nylon Locknut (90). Do not overtighten the Locknut; the Leg Press Frame must be able to pivot easily. 30 91 29 28 21. Grease an M10 x 75mm Bolt (76). Attach the 21 Foot Plate (38) to the Leg Press Frame (28) with the Bolt and an M10 Nylon Locknut (90). Make sure the decal on the Foot Plate is right side up. Do not overtighten the Locknut; the Foot Plate must be able to pivot easily. 90 25 72 90 Grease 76 38 28 Cable Assembly 22 22. See the CABLE DIAGRAMS on pages 26 and 27 as you assemble the cables and to identify the cables. Locate the Press Cable (109). Attach the Cable to the Leg Press Frame (28) with an M8 x 86mm Shoulder Bolt (37) and an M8 Nylon Locknut (91). Do not overtighten the Locknut; the Cable must be able to pivot easily. 12 109 37 28 91

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
12
19. Attach a Press Arm (30) to the Press Frame (29)
with two M8 x 66mm Bolt (86) and two M8 Nylon
Locknuts (91).
Repeat this step with the other Press Arm
(30).
21. Grease an M10 x 75mm Bolt (76). Attach the
Foot Plate (38) to the Leg Press Frame (28) with
the Bolt and an M10 Nylon Locknut (90).
Make
sure the decal on the Foot Plate is right side
up. Do not overtighten the Locknut; the Foot
Plate must be able to pivot easily.
20. Grease an M10 x 106mm Bolt (72). Attach the
Leg Press Frame (28) to the Left Base (25) with
the Bolt and an M10 Nylon Locknut (90).
Do not
overtighten the Locknut; the Leg Press Frame
must be able to pivot easily.
19
20
21
22
30
30
86
91
29
28
90
72
25
38
28
76
90
Grease
28
91
37
109
22.
See the CABLE DIAGRAMS on pages 26 and
27 as you assemble the cables and to identify
the cables.
Locate the Press Cable (109).
Attach the Cable
to the Leg Press Frame (28) with an M8 x 86mm
Shoulder Bolt (37) and an M8 Nylon Locknut (91).
Do not overtighten the Locknut; the Cable
must be able to pivot easily.
Cable Assembly