Weider Pro 4250 English Manual - Page 18

46. Locate the Ab Cable (107). Route the small ball on the Cable through the Leg Lever (4) and the Right Seat Frame (3). Make sure the Cable is over the rod in the Seat Frame. Attach a 90mm Pulley (63) inside the Leg Lever (4), over the Ab Cable (107), with an M10 x 65mm Bolt (77), two M10 Washers (99), two M10 x 12mm Spacers (101), and an M10 Nylon Locknut (90). 46 4 90 101 99 Large Ball 107 3 63 Rod 99 77 101 47. Attach a 90mm Pulley (63) inside the Right Seat 47 Frame (3), over the Ab Cable (107), with an M10 x 43mm Bolt (80) and an M10 Nylon Locknut (90). 90 63 3 107 80 48. Route the Ab Cable (107) through the Right 48 Upright (2) and under a 90mm Pulley (63). Attach the Pulley and two Half Finger Guards (66) to the Right Base (1) with an M10 x 48mm Bolt (64) and an M10 Nylon Locknut (90). Make sure the Finger Guards are oriented as shown. 107 2 90 66 63 66 64 1 49. Wrap the Ab Cable (107) over a 90mm Pulley (63). Attach the Pulley, a Cable Trap (68), and 49 two Half Finger Guards (66) to the lower hole in the indicated "U"-bracket (50) with an M10 x 48mm Bolt (64) and an M10 Nylon Locknut (90). Make sure the Cable Trap and Finger Guards are oriented as shown. 90 66 68 50 66 64 63 107 18