Weider Pro 4250 English Manual - Page 13

23. Wrap the Press Cable (109) around a 90mm Pulley (63). Attach the Pulley, two Half Finger Guards (66), a Cable Trap (68), and an M10 Washer (99) to the Left Seat Frame (27) with an M10 x 103mm Bolt (22) and an M10 Nylon Locknut (90). Make sure the Cable Trap and the Finger Guards are oriented as shown. 24. Wrap the Press Cable (109) around a "V"-pulley (62). Attach the "V"-pulley, two Half Finger Guards (66), and two M10 Washers (99) to the Leg Press Frame (28) with an M10 x 115mm Bolt (71) and an M10 Nylon Locknut (90). Make sure the Finger Guards are oriented as shown. 23 27 90 66 22 63 68 99 66 109 24 28 90 109 62 66 71 99 99 66 25. Wrap the Press Cable (109) around a 90mm Pulley (63). Attach the Pulley, two Half Finger Guards (66), a Cable Trap (68), and an M10 Washer (99) to the Left Upright (26) with an M10 x 106mm Bolt (72) and an M10 Nylon Locknut (90). Make sure the Cable Trap and Finger Guards are oriented as shown. 25 26 63 99 68 90 66 66 72 109 26. Wrap the Press Cable (109) around a 90mm 26 Pulley (63). Attach the Pulley, two Half Finger Guards (66), a Cable Trap (68), and an M10 Washer (99) to the Press Frame (29) with an M10 x 134mm Bolt (70). Make sure the Cable Trap and Finger Guards are oriented as shown. 29 109 66 70 66 99 63 68 13