Western Digital My Passport Wireless Pro User Manual - Page 53
Updating Firmware, Viewing the Firmware Version
View all Western Digital My Passport Wireless Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Updating Firmware 12 Updating Firmware This chapter includes the following topics: Viewing the Firmware Version Updating with Available Firmware Performing a Manual Update The Firmware page allows you to automatically or manually check for an update file and then install it. To check automatically and install an available file, the drive must be connected to the Internet. The current version and last update display in the Version section of the Firmware page. Warning: Do not power off your drive during firmware installation. When the installation is finished, your drive will automatically reboot. Important: You can only update your device if the battery is more than 50 percent charged or the charger is plugged into a power outlet. Viewing the Firmware Version 1. On the Dashboard, click Firmware on the Navigation bar. 2. In the Version area, the Current Version field identifies the firmware version currently installed on your device. The Last Update field identifies when the last firmware update occurred. My Passport Wireless Pro 46 User Manual