Xerox 1235N Service Guide - Page 175
Toner sensor actuators, Disconnecting the LED assembly power harness
![]() |
UPC - 042215474580
View all Xerox 1235N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
Toner sensor actuators Warning Switch off the power and disconnect the power cord. 1. Remove the top cover. Remove the drum/toner cartridge basket. Cover the basket in a lightproof black bag and store in a safe place. 2. Disconnect the four LED power harnesses from the bottom of the toner sensor board. Disconnecting the LED assembly power harness 3. Close the top cover inner unit. 4. Remove the four screws securing the metal shield over the toner sensor board. 5. Remove the three screws securing the toner sensor board and the insulator. 6. Rotate the board up to expose the component side of the board. 7. Open the top cover inner unit. 8. From the underside of the top cover inner unit, use a small screwdriver to carefully push up the arms of the sensor actuator until they are free. Service Guide 161
![](/manual_guide/products/xerox-1235n-service-guide-00d220f/175.png)