Xerox 1235N Service Guide - Page 32

Electrical specifications Characteristic Primary line voltages Primary voltage frequency range Power consumption Primary voltage fusing Secondary DC voltages RF emissions Specification 103 to 140 VAC (115 VAC nominal) 198 to 264 VAC (220 VAC nominal) 50 (48 to 52) or 60 (58 to 62) Hz 250 watts during standby state, 1300 watts during warm-up 450 watts average reference value 45 watts during Energy Star state 110 VAC configuration - 8 and 10 Amp 220 VAC configuration - 4 and 5 Amp Low Voltage Power Supply +3.3 VDC + 5 V +12 V + 32 V +3.8 V High voltage Power Supply (CH) -900 to 1.4 kV (DB) -100 to 400/+300 V (SB) -200 to -700 V (TB) +1k to +7 kV (FIX) 0 to 5 kV Both 110 and 220 VAC-configured instruments pass these standards: FCC Part 15 Class B VDE Class B EN60555-2 Class A VCCI (CISPR 22) Class B Environmental specifications Characteristic Temperature Operating Non-operating Storage Humidity Operating Non-operating Altitude Operating Non-operating Vibration/shock Operating Non-Operating (vibration) Non-operating (shock) Acoustic Noise (operating) Specification o o oo 10o to 32o C (50o to 90o F) 0 oto 32 oC (32 to 90 oF) -0 to 45 C (32 to 113 F) (with supplies) Media should be acclimated 24 hours before using in the printer. 10 to 85% relative humidity, non-condensing 10 to 95% relative humidity, non-condensing Media should be acclimated 24 hours before using in the printer. o 0 to 2500 m (8,000 ft.) at 25 C 0 to 15000 m (50,000 ft.) May drop any side or corner 50 mm (2 in.) without impairment of subsequent operation. On five mutually perpendicular axes: 0.5 g, 25-minute sweep, 5 to 200 to 5 Hz, 100 to 200 sec./sweep cycle. No resonant frequencies below 50 Hz. 15 g, trapezoidal flared pulse, 20 msec each axis. Standby: 35 dBa, Running: 55 dBa, Impulse: 57 dBa 18 Phaser 1235 Network Color Printer