Xerox 750DP 5750 Administrator Guide - Page 37
Network Setup options
![]() |
UPC - 042215455107
View all Xerox 750DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
22-9 Network Setup options Exit Setup Server Setup Network Setup Printer Setup Setup Exit Network Setup Port Setup Protocol Setup Service Setup Network Setup Network Setup options Network Setup configures the DocuColor to receive print jobs over the network systems that will be used at your site. In the Setup menu, choose Network Setup. The Network Setup menu includes three submenus that let you choose port types, protocols, and network services. You must perform Port Setup and enable at least one port. For each item you enable, you are prompted to enter settings for that item. Default values, where applicable, appear in square brackets. In Network Setup you specify network addresses and names to be used by workstations, servers, and the DocuColor when they communicate with each other. You need to display and select options only for the network systems that are currently used at your site. If your network requirements change, you can change the Network Setup at any time. For this Network or Connection Type: TCP/IP over Ethernet IPX/SPX over Ethernet If the DocuColor is configured to enable more than one protocol, it automatically switches to the correct protocol when it receives a print job. When the parallel port and one or two network ports are enabled, print jobs can be received over all of those ports at the same time. The available network types, and the Setup areas that pertain to them, are summarized in the following tables. Use this Port Setup: Use this Protocol Setup: Ethernet Setup TCP/IP Setup: Ethernet Setup Ethernet Setup IPX/SPX Setup Use this Service Setup: LPD Setup Web Services Setup Windows Setup PServer Setup (NDS, Bindery, or both) Parallel Parallel Port Setup - -
![](/manual_guide/products/xerox-750dp-5750-administrator-guide-82b86bd/37.png)