Xerox 750DP 5750 Administrator Guide - Page 42
Protocol Setup options
UPC - 042215455107
View all Xerox 750DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
22-14 Setting up the DocuColor Exit Protocol Setup TCP/IP Setup IPX/SPX Setup Protocol Setup Exit TCP/IP Setup Ethernet Setup Token Ring Setup Gateway Setup TCP/IP Setup Ignore EOF Character Yes/No [No] This option appears only if Enable Parallel Port is set to Yes. This option specifies that the DocuColor should ignore end-of-file (EOF) messages in a file. This option must be set to Yes to print PostScript files in binary format (not ASCII); under normal circumstances, it should be set to No. When this option is set to Yes, the DocuColor uses the parallel port timeout value to determine when the end of the file has been reached. When you have configured the port options, choose another port type, or choose Exit Port Setup and proceed to Protocol Setup. Protocol Setup options To configure the DocuColor, choose each protocol and enter the settings for that protocol. You can enable TCP/IP and IPX/SPX communication simultaneously. TCP/IP Setup options To configure the DocuColor for TCP/IP, choose TCP/IP Setup. Choose Ethernet Setup and enter the appropriate settings. Choose each network type you use (Ethernet and/or Token Ring) and enter the appropriate settings. Token Ring Setup appears as an option only if you have enabled Token Ring in Port Setup. If your network uses a gateway, enter the gateway address in Gateway Setup. NOTE: If TCP/IP is running on both an Ethernet and a Token Ring network, it is assumed that the two networks are already routed to each other. The DocuColor does not function as a router.