Xerox 750DP 5750 Administrator Guide - Page 43
TCP/IP Setup with Ethernet, Ethernet Setup
![]() |
UPC - 042215455107
View all Xerox 750DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
22-15 Network Setup options Network Setup Protocol Setup TCP/IP Setup TCP/IP Setup with Ethernet Ethernet Setup Enable TCP/IP for Ethernet Yes/No [Yes] Select Yes if you have a TCP/IP network connected to the DocuColor over Ethernet cabling. You need to enable TCP/IP for Ethernet to use the WebTools over Ethernet. If you are using TCP/IP for printing from Windows NT workstations, enabling TCP/IP here also enables you to use the remote utilities from Windows NT workstations using TCP/IP protocols. IP Address [127.0.0.1] Enter the DocuColor IP address for Ethernet. The DocuColor is shipped with an invalid IP address. If you plan to print with TCP/IP, you must first assign the DocuColor a unique, valid IP address. For information about setting up printing with TCP/IP, see Chapter 3. Subnet Mask [255.255.255.0] This option lets you modify the subnet mask for printing with TCP/IP over Ethernet. The subnet mask is set to 255.255.255.0 by default. If you set the IP address and you need to set the subnet mask, enter one of the following values: • 255.0.0.0-If the IP address starts with a number less than 128. • 255.255.0.0-If the IP address starts with a number from 128 through 191. • 255.255.255.0-If the IP address starts with a number greater than 191.
![](/manual_guide/products/xerox-750dp-5750-administrator-guide-82b86bd/43.png)