Xerox 750DP 5750 Administrator Guide - Page 38
Use this Port Setup
![]() |
UPC - 042215455107
View all Xerox 750DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
22-10 Setting up the DocuColor If the Token Ring option is installed, you have these additional options: For this Network or Connection Type: TCP/IP over Token Ring IPX/SPX over Token Ring Use this Port Setup: Use this Protocol Setup: Use this Service Setup: Token Ring Setup Token Ring Setup TCP/IP Setup: Token Ring Setup LPD Setup Web Services Setup Windows Setup IPX/SPX Setup PServer Setup (NDS, Bindery, or both) TO ACCESS NETWORK SETUP OPTIONS: 1. Confirm that the network cable is connected to the DocuColor. During Network Setup, the DocuColor queries the network for zones, servers, and server-based queues. If you perform Network Setup without a connected and functioning network, default settings are used that may not fulfill your needs. 2. Choose Network Setup from the main Setup menu. 3. Choose Port Setup. 4. To use Ethernet, choose Ethernet Setup from the Port Setup menu, and enter the appropriate settings. 5. If the Token Ring option is installed, choose Token Ring Setup and enter the appropriate settings. 6. To print to the parallel port, choose Parallel Port Setup from the Port Setup menu, and enter the appropriate settings. 7. When you have finished entering port settings, choose Exit Port Setup and then choose Protocol Setup. 8. Enter the appropriate settings for the protocol or protocols you will use. 9. When you have finished entering protocol settings, choose Exit Protocol Setup and then choose Service Setup. 10. Enter the appropriate settings for the services you will use. The options are described in detail in the following pages.
![](/manual_guide/products/xerox-750dp-5750-administrator-guide-82b86bd/38.png)